{"title":"GM Conversion Kits","description":"","products":[{"product_id":"new-direct-fit-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-1","title":"New Direct Fit Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-1","description":"\u003cp\u003e1964–1972 GM A, F, X BODY FRONT POWER DRUM\/DISC BRAKE CONVERSION KIT -1 (SINGLE) PISTON WITH 11\" ROTOR-POWER-STOCK RIDE HEIGHT \u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003ePremium quality calipers are zinc-coated for ultimate corrosion resistance. Kit includes DOT Flex hoses and new steel adapter lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with some 14” and most 15” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston, high-strength cast iron calipers\u003c\/li\u003e\n\u003cli\u003eDual reservoir cast steel master cylinder\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster and brackets\u003c\/li\u003e\n\u003cli\u003eNew forged disc brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, slider pins, and anti-Rattle Clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, wheel bearings, grease caps\u003c\/li\u003e\n\u003cli\u003eDOT Flex Hoses and steel adapter lines\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications\u003cbr\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32860166586500,"sku":"A123-1","price":1245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1_1.jpg?v=1748436931"},{"product_id":"new-direct-kit-front-drum-to-disc-brake-conversion-w-rotors-a123","title":"New Direct Kit Front Drum to Disc Brake Conversion W\/Rotors. A123","description":"\u003cp\u003e1964-1974 GM A, F, X BODY FRONT NON-POWER DRUM\/DISC BRAKE CONVERSION KIT\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front non-power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention.  11-inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston, high-strength cast iron calipers\u003c\/li\u003e\n\u003cli\u003eNew master Cylinder\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eNew forged disc brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, new slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, wheel bearings, grease caps\u003c\/li\u003e\n\u003cli\u003eDOT flex hoses and Steel adapter lines\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications.\u003cbr\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32860167700612,"sku":"A123","price":1015.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123_1.jpg?v=1748436924"},{"product_id":"new-direct-fit-rear-drum-to-disc-conversion-kit-w-rotors-black-a110-2bk","title":"New Direct Fit Rear Drum to Disc Conversion Kit W\/Rotors. Black A110-2BK","description":"\u003cp\u003eStandard Rear Disc Brake Conversion, With Parking Brake, Ford 9\" Large Bearing, Ford And GM Bolt Pattern\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for Ford 9” large bearing vehicles with the old style flange. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated with a clear anodized finish for ultimate corrosion resistance. Each caliper has a steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eAdapters allow you to re-use your factory parking brake cable\u003c\/li\u003e\n\u003cli\u003eDOT Flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- P\/N 1047\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eE-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional rotor upgrades (slotted, cross-drilled, plated) available\u003cbr\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003cbr\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32909023772804,"sku":"A110-2BK","price":818.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA110-2BK_1.png?v=1748436902"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a110-2r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A110-2R","description":"\u003cp\u003eStandard Rear Disc Brake Conversion, With Parking Brake, Ford 9\" Large Bearing, Ford And GM Bolt Pattern\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for Ford 9” large bearing vehicles with the old style flange. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated with a clear anodized finish for ultimate corrosion resistance. Each caliper has a steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eAdapters allow you to re-use your factory parking brake cable\u003c\/li\u003e\n\u003cli\u003eDOT Flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- P\/N 1047\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eE-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional rotor upgrades (slotted, cross-drilled, plated) available\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003cbr\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32909038649476,"sku":"A110-2R","price":818.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA110-2R_1.png?v=1748436900"},{"product_id":"new-direct-fit-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-23","title":"New Direct Fit Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-23","description":"\u003cp\u003e\u003cstrong\u003eFRONT POWER DISC BRAKE CONVERSION KIT, \u003c\/strong\u003e\u003cstrong\u003e1964 - 1974 GM A, F, X BODY, \u003c\/strong\u003e\u003cstrong\u003ebolts to factory drum brake spindle, \u003c\/strong\u003e\u003cstrong\u003efits 14” disc brake wheels  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1964-1974 GM- A, F, X body to front power disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock spindles and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003eKit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston, high-strength cast iron calipers\u003c\/li\u003e\n\u003cli\u003eDual bowl manual Master Cylinder and powder booster\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D368\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eAnti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, wheel bearings, grease caps\u003c\/li\u003e\n\u003cli\u003eDOT Flex Hoses, and new hard lines\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Each caliper has a steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32929829814404,"sku":"A123-23","price":1013.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-23_1.jpg?v=1748436881"},{"product_id":"new-direct-fit-front-drum-to-disc-conversion-kit-w-rotors-a126-71","title":"New Direct Fit Front Drum to Disc Conversion Kit W\/Rotors. A126-71","description":"\u003cp\u003e1967-1970 GM \/ CHEVY C10 (6 LUG) 2WD FRONT POWER DRUM\/DISC BRAKE CONVERISON KIT-1 (SINGLE) PISTON-6 LUG\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1967-1970 GM ½ ton Truck with automatic or manual transmission from drum to disc brakes.\u003c\/p\u003e\n\u003cp\u003eManufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGM truck standard single piston cast iron calipers\u003c\/li\u003e\n\u003cli\u003eSemi metallic brake pads - D368\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eDual reservoir cast steel master cylinder\u003c\/li\u003e\n\u003cli\u003e9” booster with required brackets\u003c\/li\u003e\n\u003cli\u003eDOT Flex Hoses, axle shims, and new hard line\u003c\/li\u003e\n\u003cli\u003eCaliper dust boots\u003c\/li\u003e\n\u003cli\u003eTwo 11.61” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrade (dimple drilled, slotted and plated) available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eE-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003cbr\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/p\u003e\n\u003cp\u003eFits into most 15” Rims, Bolts to factory drum brake spindles (6 lug).\u003c\/p\u003e\n\u003cp\u003ePlease consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 with any questions.\u003cbr\u003e\u003cbr\u003eGet up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 2WD GM trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 11.61 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003cbr\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32929829912708,"sku":"A126-71","price":997.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-71_1.jpg?v=1748436880"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-black-a126bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit. Black A126BK","description":"\u003cp\u003e1973-1991 CHEVY, GMC 1\/2T 4WD, FULL SIZE 4WD SUV REAR DRUM\/DISC BRAKE CONVERSION KIT, 6 LUG-1 (SINGLE) PISTON W\/11.4IN ROTORS-USA MADE\u003c\/p\u003e\n\u003cp\u003eThese upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines.\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ‘73-‘87 GM ½ ton -4WD trucks and ’73-’91 full size 4WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.\u003c\/p\u003e\n\u003cp\u003ePlease consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-800-448-7722 with any questions.\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.4” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional Upgrades:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded “firm feel” master cylinder available (1988-1999 vehicles)\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGet up to 30% more braking power from your GM truck, by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto ‘73-‘87 GM ½ ton 4WD trucks and ’73-’91 full size 4WD SUV’s. This is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32929830174852,"sku":"A126BK","price":820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126BK_1.jpg?v=1748436877"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-red-a126r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit. Red A126R","description":"\u003cp\u003e1973-1991 CHEVY, GMC 1\/2T 4WD, FULL SIZE 4WD SUV REAR DRUM\/DISC BRAKE CONVERSION KIT, 6 LUG-1 (SINGLE) PISTON W\/11.4IN ROTORS-USA MADE\u003c\/p\u003e\n\u003cp\u003eThese upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines.\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ‘73-‘87 GM ½ ton -4WD trucks and ’73-’91 full size 4WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.\u003c\/p\u003e\n\u003cp\u003ePlease consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-800-448-7722 with any questions.\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.4” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable Upgrades:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded “firm feel” master cylinder available (1988-1999 vehicles)\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGet up to 30% more braking power from your GM truck, by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto ‘73-‘87 GM ½ ton 4WD trucks and ’73-’91 full size 4WD SUV’s. This is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32929830273156,"sku":"A126R","price":820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126R_1.jpg?v=1748436876"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-1bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-1BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1971-1987 GM 1\/2 TON 2WD TRUCK \u0026amp; 1973-1991 FULL SIZE 2WD SUV (5 LUG)\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ‘71-87 GM ½ ton -2WD trucks and ’73-’91 full size 2WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features.\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.35” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eHigh volume “firm feel” master cylinder available (1988-1999 vehicles)\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power from your GM truck, by installing this SSBC rear disc brake conversion kit. This kit is designed to bolt directly onto ‘71-‘87 GM ½ ton 2WD trucks and ’73-’91 full size 2WD SUV’s. This is a huge improvement over stock drums.  You'll get better performance with a factory look. \u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003e Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32937519513732,"sku":"A126-1BK","price":787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-1BK_1.jpg?v=1748436844"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-1r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-1R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1971-1987 GM 1\/2 TON 2WD TRUCK \u0026amp; 1973-1991 FULL SIZE 2WD SUV (5 LUG)\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ‘71-87 GM ½ ton -2WD trucks and ’73-’91 full size 2WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features.\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.35” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eHigh volume “firm feel” master cylinder available (1988-1999 vehicles)\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power from your GM truck, by installing this SSBC rear disc brake conversion kit. This kit is designed to bolt directly onto ‘73-‘87 GM ½ ton 2WD trucks and ’73-’91 full size 2WD SUV’s. This is a huge improvement over stock drums.  You'll get better performance with a factory look. \u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003e Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32937519644804,"sku":"A126-1R","price":787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-1R_1.jpg?v=1748436843"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a126-4","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A126-4","description":"\u003cp\u003eREAR DISC brake CONVERSION, 1988-1999 GM 1\/2 TON 4WD, \u003c\/p\u003e\n\u003cp\u003eFOR TRUCKS WITH  11 INCH DRUM REAR BRAKES\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e**Note: Will not fit the corporate 14 bolt rear differentials \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncluded “firm feel” high volume master-cylinder for increased braking performance\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32953795412100,"sku":"A126-4","price":1947.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgradeA126-4_1.jpg?v=1775507828"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-4bk","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-4BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION, 1988-1999 GM 1\/2 TON 4WD, \u003c\/p\u003e\n\u003cp\u003eFOR TRUCKS WITH  11 INCH DRUM REAR BRAKES\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e**Note: Will not fit the corporate 14 bolt rear differentials \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncluded “firm feel” high volume master-cylinder for increased braking performance\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32953795477636,"sku":"A126-4BK","price":2047.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgradeA126-4BK_1.jpg?v=1775508199"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-4r","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-4R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION, 1988-1999 GM 1\/2 TON 4WD, \u003c\/p\u003e\n\u003cp\u003eFOR TRUCKS WITH  11 INCH DRUM REAR BRAKES\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e**Note: Will not fit the corporate 14 bolt rear differentials \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncluded “firm feel” high volume master-cylinder for increased braking performance\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32953796231300,"sku":"A126-4R","price":2047.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgradeA126-4_1_026e3d3c-6972-42c5-81a4-375058cf52de.jpg?v=1775508062"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125-3bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/DS Rotors. Black A125-3BK-DS","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, NON-STAGGERED SHOCKS, 1964-1977 GM A BODY, 10\/12 BOLT REAR END \u003cbr\u003e\u003cbr\u003eThis kit contains all the parts you need to convert your 1964-1977 GM- A body, 10\/12 bolt pattern vehicle from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote: Will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eKit features:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a powder coated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter dimple drilled\/slotted rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Description\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1964-1977 GM- A body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003cbr\u003e\u003cbr\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are powder-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003cbr\u003e\u003cbr\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003cbr\u003e\u003cbr\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003cbr\u003e\u003cbr\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959024300164,"sku":"A125-3BK-DS","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeConversionA125-3BK-DS_1.png?v=1777923418"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125-3r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125-3R","description":"\u003cp\u003e\u003cspan\u003eREAR DISC BRAKE CONVERSION KIT, NON-STAGGERED SHOCKS, 1964-1977 GM A BODY, 10\/12 BOLT REAR END \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis kit contains all the parts you need to convert your 1964-1977 GM- A body, 10\/12 bolt pattern vehicle from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote: Will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eKit features:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a powder-coated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003cli\u003eProduct Description\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1964-1977 GM- A body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications required.\u003c\/span\u003e\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959024365700,"sku":"A125-3R","price":833.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-3R_1.png?v=1748436809"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A125BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT-STAGGERED SHOCKS,1968-1981 GM F, X BODIES, 10\/12 BOLT REAR END\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e**Note: will not work with C-clip eliminators\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959024627844,"sku":"A125BK","price":666.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeConversionA125BK_1.png?v=1777308643"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT-STAGGERED SHOCKS,1968-1981 GM F, X BODIES, 10\/12 BOLT REAR END\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e**Note: will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKit feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959024660612,"sku":"A125R","price":666.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeConversionA125R_1.png?v=1777308586"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125-2bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A125-2BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1955-1968 GM full size 10\/12 BOLT \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1955-1968 GM full size, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote: Will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKit Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1955-1968 GM, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washer\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959025283204,"sku":"A125-2BK","price":648.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-2BK_1.png?v=1748436799"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125-2r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125-2R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1955-1968 GM FULL SIZE 10\/12 BOLT \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1955-1968 GM full size, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.\u003c\/p\u003e\n\u003cp\u003ePlease consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a powder coated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1955-1968 GM, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washer\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32959025348740,"sku":"A125-2R","price":648.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeConversionA125-2R-DS_1.png?v=1777923148"},{"product_id":"american-made-comp-s-4-piston-billet-aluminum-rear-disc-brake-kit-w-ds-rotors-clear-w125-42","title":"American Made Comp S 4-Piston Billet Aluminum Rear Disc Brake Kit W\/DS Rotors. Clear W125-42","description":"\u003cp\u003e1962-1981 GM 10\/12 BOLT REAR, DRUM\/DISC BRAKE CONVERSION KIT-4 PISTON COMP STREET CALIPERS-NON-STAGGERED SHOCKS-Wheel kit only (PAIR)\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with an improved look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators, Made in the USA, No parking brake\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition street 4 piston, light-weight aluminum calipers\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D43\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated rotors are included \u003c\/li\u003e\n\u003cli\u003eIncludes e-coated mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel flex hoses and spacers\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32960309887108,"sku":"W125-42","price":1317.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/W125-42_1.jpg?v=1748436794"},{"product_id":"american-made-comp-s-4-piston-billet-aluminum-rear-disc-brake-kit-w-ds-rotors-black-w125-42bk","title":"American Made Comp S 4-Piston Billet Aluminum Rear Disc Brake Kit W\/DS Rotors. Black W125-42BK","description":"\u003cp\u003e1962-1981 GM 10\/12 BOLT REAR, DRUM\/DISC BRAKE CONVERSION KIT-4 PISTON COMP STREET CALIPERS-NON-STAGGERED SHOCKS-Wheel kit only (PAIR)-USA MADE\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with an improved look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators, Made in the USA, No parking brake\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition street 4 piston, light-weight aluminum calipers\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D43\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated performance rotors are included \u003c\/li\u003e\n\u003cli\u003eIncludes e-coated mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel flex hoses and spacers\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32960309919876,"sku":"W125-42BK","price":1417.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/W125-42BK_1.jpg?v=1748436793"},{"product_id":"american-made-comp-s-4-piston-billet-aluminum-rear-disc-brake-kit-w-ds-rotors-red-w125-42r","title":"American Made Comp S 4-Piston Billet Aluminum Rear Disc Brake Kit W\/DS Rotors. Red W125-42R","description":"\u003cp\u003e1962-1981 GM 10\/12 BOLT REAR, DRUM\/DISC BRAKE CONVERSION KIT-4 PISTON COMP STREET CALIPERS-NON-STAGGERED SHOCKS-Wheel kit only (PAIR)\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with an improved look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators, Made in the USA, No parking brake\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition street 4 piston, light-weight aluminum calipers\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D43\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated performance rotors are included \u003c\/li\u003e\n\u003cli\u003eIncludes e-coated mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel flex hoses and spacers\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32960310149252,"sku":"W125-42R","price":1417.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/W125-42R_1.jpg?v=1748436791"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-1a","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-1A","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON CALIPERS, 1964–1974 GM A, F, X BOD\u003cstrong\u003eY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’74 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features: \u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged disk brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter turbo slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376561796,"sku":"A123-1A","price":1915.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1A_1.jpg?v=1748436784"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-black-a123-1abk","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. Black A123-1ABK","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON CALIPERS, 1964–1974 GM A, F, X BOD\u003cstrong\u003eY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’74 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged disk brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376660100,"sku":"A123-1ABK","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1ABK_1.jpg?v=1748436783"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-red-a123-1ar","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. Red A123-1AR","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON CALIPERS, 1964–1974 GM A, F, X BOD\u003cstrong\u003eY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’74 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged disk brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled , slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376692868,"sku":"A123-1AR","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1AR_1.jpg?v=1748436782"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-1ads","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-1ADS","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON CALIPERS AND 2\" DROP SPINDLES\u003c\/p\u003e\n\u003cp\u003e1964 – 1974 GM A, F, X BODY \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’67 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged 2” disk brake drop spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376791172,"sku":"A123-1ADS","price":2250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1ADS_1.jpg?v=1748436780"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-black-a123-1adsbk","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. Black A123-1ADSBK","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON CALIPERS AND 2\" DROP SPINDLES\u003c\/p\u003e\n\u003cp\u003e1964 – 1974 GM A, F, X BODY \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’67 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged 2” disk brake drop spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376856708,"sku":"A123-1ADSBK","price":2325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1ADSBK_1.jpg?v=1748436779"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-red-a123-1adsr","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. Red A123-1ADSR","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2-PISTON\u003cspan\u003e \u003c\/span\u003eCALIPERS AND 2\" DROP SPINDLES\u003c\/p\u003e\n\u003cp\u003e1964 – 1974 GM A, F, X BODY \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’67 GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at                   1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster with brackets\u003c\/li\u003e\n\u003cli\u003eDual reservoir steel cast master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged 2” disk brake drop spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish and dust seals\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter turbo slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, slider pins, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  Kit includes stainless steel flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376889476,"sku":"A123-1ADSR","price":2325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1ADSR_1.jpg?v=1748436776"},{"product_id":"new-direct-fit-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-1ds","title":"New Direct Fit Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-1DS","description":"\u003cp\u003eFRONT POWER DISC BRAKE CONVERSION KIT WITH 2” DROP SPINDLES\u003c\/p\u003e\n\u003cp\u003e1964 – 1974 GM A, F, X BODY \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-800-448-7722 with any questions.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKIT FEATURES:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston, high-strength cast iron calipers\u003c\/li\u003e\n\u003cli\u003eDual reservoir cast steel master cylinder\u003c\/li\u003e\n\u003cli\u003e9” single diaphragm booster and brackets\u003c\/li\u003e\n\u003cli\u003eNew forged disc brake 2” drop spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, slider pins, and anti-Rattle Clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, wheel bearings, grease caps\u003c\/li\u003e\n\u003cli\u003eDOT Flex Hoses, and steel adapter lines\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all Hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003ePremium quality calipers are zinc-coated for ultimate corrosion resistance. Kit includes DOT Flex hoses and new steel adapter lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with some 14” and most 15” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976376955012,"sku":"A123-1DS","price":1527.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-1DS_1.jpg?v=1748436774"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125-1bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A125-1BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, NON STAGGERED SHOCKS \u003c\/p\u003e\n\u003cp\u003e1968-1981 GM F, X BODIES, 10\/12 BOLT REAR END\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e**Note: will not work with C-clip eliminators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976981688452,"sku":"A125-1BK","price":613.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-1BK_1.png?v=1748436768"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125-1r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125-1R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, NON STAGGERED SHOCKS \u003c\/p\u003e\n\u003cp\u003e1968-1981 GM F, X BODIES, 10\/12 BOLT REAR END\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e**Note: Will not work with C-clip eliminators\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKit feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper Dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 10.5” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976981753988,"sku":"A125-1R","price":613.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-1R_1.png?v=1748436767"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a125-26","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A125-26","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, NON-STAGGERED SHOCKS, 1962-1977 GM 10\/12 BOLT\u003c\/p\u003e\n\u003cp\u003eSport R1 Aluminum Calipers\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators\u003c\/p\u003e\n\u003cp\u003eThis made in the USA kit contains all the parts you need to convert your ’62-77 GM 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003eKit feature: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish with powder coating options available\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.25” diameter Turbo slotted, heavy duty rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eIncludes dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for ’62-’77 GM 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.25 in diameter, turbo slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC-USA customer service\/ technical support at 716-775-6700\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976981852292,"sku":"A125-26","price":1840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-26_1.png?v=1748436766"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125-26bk","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A125-26BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT , 1971-1996 GM MID-SIZE 10 \u0026amp; 12 BOLT WITH 11\" DRUMS, 5 X 5 WHEEL BOLT PATTERN\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1971-1996 GM- mid-size, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features.\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eIncludes dimple drilled, slotted and plated rotors\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 71-96 GM- full size, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976981917828,"sku":"A125-26BK","price":1915.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-26BK_1.png?v=1748436764"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125-26r","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125-26R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT \u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your GM, 10\/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e**Note: will not work with C-clip eliminators\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features.\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eCalipers come with a zinc plated finish and dust boots\u003c\/li\u003e\n\u003cli\u003eKit comes with DOT Flex Hoses, axle shims, new hard lines\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHardware with parking brake cable adapters\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eIncludes dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM, 10\/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32976981983364,"sku":"A125-26R","price":1915.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/DiscBrakeCaliperA125-26R_1.png?v=1748436763"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a125-27","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A125-27","description":"\u003cp\u003eGM FULL SIZE 10\/12 BOLT REAR DISC BRAKE CONVERSION KIT - SPORT R1 ALUMINUM CALIPERS W\/INTERNAL PARKING BRAKE - 11.25 INCH ROTORS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included.\u003c\/li\u003e\n\u003cli\u003eCaliper includes built-in parking brake.\u003c\/li\u003e\n\u003cli\u003eIncludes braided stainless flex lines.\u003c\/li\u003e\n\u003cli\u003eIncludes Sport R1 Single-Piston aluminum calipers.\u003c\/li\u003e\n\u003cli\u003eIncludes high performance pads.\u003c\/li\u003e\n\u003cli\u003eIncludes dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eWill not work with C-clip eliminators.\u003c\/li\u003e\n\u003cli\u003eCalipers MADE IN THE USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note that the calipers in this kit are coated with a clear anodize finish. Upgrade to red or black calipers for an additional cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eREMINDER! Please do not purchase this kit without reviewing the wheel fitment diagram.\u003c\/p\u003e\n\u003cdiv class=\"ctc-tooltip\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"ctc-tooltip\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32982594879620,"sku":"A125-27","price":1818.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A125-27_1.jpg?v=1748436753"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a125-27bk","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A125-27BK","description":"\u003cp\u003eGM FULL SIZE 10\/12 BOLT REAR DISC BRAKE CONVERSION KIT - SPORT R1 ALUMINUM CALIPERS W\/INTERNAL PARKING BRAKE - 11.25 INCH ROTORS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included.\u003c\/li\u003e\n\u003cli\u003eCaliper includes built-in parking brake.\u003c\/li\u003e\n\u003cli\u003eIncludes braided stainless flex lines.\u003c\/li\u003e\n\u003cli\u003eIncludes Sport R1 Single-Piston aluminum calipers.\u003c\/li\u003e\n\u003cli\u003eIncludes high performance pads.\u003c\/li\u003e\n\u003cli\u003eIncludes dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eWill not work with C-clip eliminators.\u003c\/li\u003e\n\u003cli\u003eCalipers MADE IN THE USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eREMINDER! Please do not purchase this kit without reviewing the wheel fitment diagram.\u003c\/p\u003e\n\u003cdiv class=\"ctc-tooltip\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32982594977924,"sku":"A125-27BK","price":1893.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A125-27BK_1.jpg?v=1748436752"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a125-27r","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A125-27R","description":"\u003cp\u003eGM FULL SIZE 10\/12 BOLT REAR DISC BRAKE CONVERSION KIT - SPORT R1 ALUMINUM CALIPERS W\/INTERNAL PARKING BRAKE - 11.25 INCH ROTORS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware included.\u003c\/li\u003e\n\u003cli\u003eCaliper includes built-in parking brake.\u003c\/li\u003e\n\u003cli\u003eIncludes braided stainless flex lines.\u003c\/li\u003e\n\u003cli\u003eIncludes Sport R1 Single-Piston aluminum calipers.\u003c\/li\u003e\n\u003cli\u003eIncludes high performance pads.\u003c\/li\u003e\n\u003cli\u003eIncludes  dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eWill not work with C-clip eliminators.\u003c\/li\u003e\n\u003cli\u003eCalipers MADE IN THE USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eREMINDER! Please do not purchase this kit without reviewing the wheel fitment diagram.\u003c\/p\u003e\n\u003cdiv class=\"ctc-tooltip\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32982595174532,"sku":"A125-27R","price":1893.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A125-27R_1.jpg?v=1748436751"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a126-3","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A126-3","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT FOR 10\" DRUM REAR BRAKES\u003c\/p\u003e\n\u003cp\u003e1988-1999 GM 1\/2 TON  4WD\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e**Note: Truck must have 10\" rear drum brakes, will not fit if truck has 11\" rear drum brakes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncludes “firm feel” high volume master-cylinder for increased performance\u003c\/li\u003e\n\u003cli\u003eadapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated rotors ) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994073608324,"sku":"A126-3","price":2057.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgrade126-3_1.jpg?v=1775507541"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-3bk","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-3BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT FOR 10\" DRUM REAR BRAKES. 1988-1999 GM 1\/2 TON  4WD\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e**Note: Truck must have 10\" rear drum brakes, will not fit if truck has 11\" rear drum brakes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncludes “firm feel” high volume master-cylinder for increased performance\u003c\/li\u003e\n\u003cli\u003eadapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994073673860,"sku":"A126-3BK","price":2132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgrade126-3BK_1.jpg?v=1775507303"},{"product_id":"american-made-super-r1-rear-88-99-gm-1-2-ton-4wd-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-3r","title":"American Made Super R1 Rear 88-99 GM 1\/2-Ton 4WD Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-3R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT FOR 10\" DRUM REAR BRAKES\u003c\/p\u003e\n\u003cp\u003e1988-1999 GM 1\/2 TON  4WD\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e**Note: Truck must have 10\" rear drum brakes, will not fit if truck has 11\" rear drum brakes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength billet aluminum calipers with stainless steel pistons, and internal parking brake\u003c\/li\u003e\n\u003cli\u003eIncludes “firm feel” high volume master-cylinder for increased performance\u003c\/li\u003e\n\u003cli\u003eadapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D369\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.3” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (slotted, dimple-drilled, plated) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994073739396,"sku":"A126-3R","price":2132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/BrakeUpgrade126-3R_1.jpg?v=1775507009"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-5bk","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-5BK","description":"\u003cp\u003eREAR DISC brake CONVERSION KIT, 1992-1999 GM 1\/2 TON  2WD  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 11 inch drum rear brakes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1992-1999 GM ½ ton - 2WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded “firm feel” high volume master- cylinder for increased braking performance\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.35” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 2WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074132612,"sku":"A126-5BK","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-5BK_1.jpg?v=1748436745"},{"product_id":"new-direct-fit-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-5r","title":"New Direct Fit Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-5R","description":"\u003cp\u003eREAR DISC brake CONVERSION KIT, 1992-1999 GM 1\/2 TON  2WD  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 11 inch drum rear brakes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1992-1999 GM ½ ton - 2WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston cast iron calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eIncluded “firm feel” high volume master- cylinder for increased braking performance\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit includes DOT Flex Hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are finished with a Zinc plating\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D347\u003c\/li\u003e\n\u003cli\u003eCaliper dust boots\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11.35” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with all hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available ( Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 2WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.\u003c\/p\u003e\n\u003cp\u003eCalipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074165380,"sku":"A126-5R","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-5R_1.jpg?v=1748436744"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a126-50","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A126-50","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 2005-2014 GMC \u0026amp; CHEVY 1500, 2WD OR 4WD\u003c\/p\u003e\n\u003cp\u003eThis made in the USA kit contains all the parts you need to convert your 2005-2014 GMC and Chevy 1500 with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 12” diameter dimple drilled, slotted and plated heavy duty rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing a, “Made in USA,” SSBC rear disc brake conversion. This Bolt on kit is ideal for 1\/2 ton Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 12 in diameter, turbo slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074198148,"sku":"A126-50","price":1777.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-50_1.jpg?v=1748436742"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-50bk","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-50BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 2005-2014 GMC \u0026amp; CHEVY 1500, 2WD OR 4WD\u003c\/p\u003e\n\u003cp\u003eThis made in the USA kit contains all the parts you need to convert your 2005-2014 GMC and Chevy 1500 with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 12” diameter dimple drilled, slotted and plated rotors \u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing a, “Made in USA,” SSBC rear disc brake conversion. This Bolt on kit is ideal for 1\/2 ton Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 12 in diameter, turbo slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074427524,"sku":"A126-50BK","price":1877.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-50BK_1.jpg?v=1748436741"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-50r","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-50R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 2005-2014 GMC \u0026amp; CHEVY 1500, 2WD OR 4WD\u003c\/p\u003e\n\u003cp\u003eThis made in the USA kit contains all the parts you need to convert your 2005-2014 GMC and Chevy 1500 with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 12” diameter dimple drilled, slotted and plated heavy duty rotors \u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing a, “Made in USA,” SSBC rear disc brake conversion. This Bolt on kit is ideal for 1\/2 ton Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 12 in diameter, turbo slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074460292,"sku":"A126-50R","price":1877.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-50R_1.jpg?v=1748436740"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-clear-a126-59","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Clear A126-59","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1\/2 TON  4WD TRUCK\u003c\/p\u003e\n\u003cp\u003eSport R1 aluminum caliper with parking brake\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits into most 15” Rims\u003c\/li\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled, slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074525828,"sku":"A126-59","price":1930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-59_1.jpg?v=1748436738"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-black-a126-59bk","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Black A126-59BK","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1\/2 TON  4WD TRUCK\u003c\/p\u003e\n\u003cp\u003eSport R1 aluminum caliper with parking brake\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits into most 15” Rims\u003c\/li\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074591364,"sku":"A126-59BK","price":2030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-59BK_1.jpg?v=1748436737"},{"product_id":"american-made-sport-r1-billet-aluminum-rear-drum-to-disc-brake-conversion-kit-w-rotors-red-a126-59r","title":"American Made Sport R1 Billet Aluminum Rear Drum to Disc Brake Conversion Kit W\/Rotors. Red A126-59R","description":"\u003cp\u003eREAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1\/2 TON  4WD TRUCK\u003c\/p\u003e\n\u003cp\u003eSport R1 aluminum caliper with parking brake\u003c\/p\u003e\n\u003cp\u003eThis Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eKit features:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits into most 15” Rims\u003c\/li\u003e\n\u003cli\u003eSport R1, single piston light-weight billet aluminum calipers with built in parking brakes\u003c\/li\u003e\n\u003cli\u003eTwo 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncluded adapters allow you to re-use your factory parking brake cables\u003c\/li\u003e\n\u003cli\u003eKit comes with stainless steel braided flex hoses, axle shims, and new hard lines\u003c\/li\u003e\n\u003cli\u003eCalipers are coated with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eStainless Steel pistons\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D154\u003c\/li\u003e\n\u003cli\u003eCaliper Dust seals ( D.O.T. design)\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eFits on stock rear axles\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled and slotted) available\u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1\/2 ton 4WD Chevy\/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.\u003c\/p\u003e\n\u003cp\u003eThis conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.\u003c\/p\u003e\n\u003cp\u003eKit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled, slotted and plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service\/ technical support at 1-716-775-6700.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32994074624132,"sku":"A126-59R","price":2030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A126-59R_1.jpg?v=1748436735"},{"product_id":"new-direct-fit-front-drum-to-disc-brake-conversion-kit-w-rotors-a123-22","title":"New Direct Fit Front Drum to Disc Brake Conversion Kit W\/Rotors. A123-22","description":"\u003cp\u003eFRONT NON-POWER DISC BRAKE CONVERSION KIT, 1964-1974 GM A, F, X BODY, \u003c\/p\u003e\n\u003cp\u003eBolts to factory drum brake spindle\u003c\/p\u003e\n\u003cp\u003eFits 14” disc brake wheels\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your 1964-1974 GM- A, F, X body to front non-power disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock spindles and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 for assistance.\u003c\/p\u003e\n\u003cp\u003eKit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle piston, high-strength cast iron calipers\u003c\/li\u003e\n\u003cli\u003eDual bowl manual Master Cylinder\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eSemi- metallic brake pads- D368\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter heavy duty vented rotors\u003c\/li\u003e\n\u003cli\u003eIncludes e-coated Mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers\u003c\/li\u003e\n\u003cli\u003eAnti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, wheel bearings, grease caps\u003c\/li\u003e\n\u003cli\u003eDOT Flex Hoses, and new hard lines\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All hardware included\u003c\/li\u003e\n\u003cli\u003eOptional rotor upgrades (dimple drilled, slotted and plated ) available\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Each caliper has a steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market! \u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32995297886340,"sku":"A123-22","price":855.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/products\/A123-22_1.jpg?v=1748436734"},{"product_id":"american-made-super-twin-hd-2-piston-billet-aluminum-front-drum-to-disc-brake-conversion-kit-w-rotors-clear-a123-a","title":"American Made Super Twin HD 2-Piston Billet Aluminum Front Drum to Disc Brake Conversion Kit W\/Rotors. Clear A123-A","description":"\u003cp\u003e1964 –1974 GM A, F, X BODY FRONT NON-POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2- PISTON CALIPERS\u003c\/p\u003e\n\u003cp\u003eThis kit contains all the parts you need to convert your ’64-’74 GM- A, F, X body non-power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service\/technical support at 1-716-775-6700 with any questions.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eBullet points\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-piston light weight, Super Twin HD billet aluminum calipers made in the USA\u003c\/li\u003e\n\u003cli\u003eDual bowl steel cast Master cylinder\u003c\/li\u003e\n\u003cli\u003eNew forged disc brake standard ride height spindles\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve\u003c\/li\u003e\n\u003cli\u003eCalipers come with a clear anodized finish\u003c\/li\u003e\n\u003cli\u003eDual O-ring system (pressure and seal) for optimal sealing from fluid leaks and dirt\u003c\/li\u003e\n\u003cli\u003eSemi-metallic brake pads- D52\u003c\/li\u003e\n\u003cli\u003eStainless steel shim washers to center the caliper assembly\u003c\/li\u003e\n\u003cli\u003eTwo 11” diameter turbo slotted rotors with zinc plating\u003c\/li\u003e\n\u003cli\u003eIncludes original style caliper mounting brackets and splash shields\u003c\/li\u003e\n\u003cli\u003eStainless steel spacers, flex lines, and anti-rattle clips\u003c\/li\u003e\n\u003cli\u003eGrease seals, bearings, and grease caps\u003c\/li\u003e\n\u003cli\u003eSimple instructions for bolt-on installation with All Hardware included\u003c\/li\u003e\n\u003cli\u003eIncludes Optional rotor upgrades (dimple drilled and slotted) \u003c\/li\u003e\n\u003cli\u003eOptional Caliper powder coat colors available (Red, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003eProduct Description\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eGet up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.\u003c\/p\u003e\n\u003cp\u003eThe upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!\u003c\/p\u003e\n\u003cp\u003eDisc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.\u003c\/p\u003e\n\u003cp\u003eSSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.\u003c\/p\u003e","brand":"SSBC-USA","offers":[{"title":"Default Title","offer_id":32995297984644,"sku":"A123-A","price":1765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/2264\/3076\/files\/A123-A_1.jpg?v=1748436733"}],"url":"https:\/\/ssbc-usa.com\/collections\/gm-conversion-kits.oembed?page=6","provider":"SSBC-USA","version":"1.0","type":"link"}