Ford Conversion Kits

REAR DISC brake CONVERSION KIT, 1998-2001 DODGE 1500 2 AND 4WD

This kit contains all the parts you need to convert your 1998 - 2001 Dodge 1500 truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a Zinc plated finish for corrosion resistance
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 11.4” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• DOT Flex Hoses, axle shims, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated) available
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto 1998 - 2001 Dodge Ram trucks with automatic or manual transmission.  This is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements. 

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.4 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION KIT, 1998-2001 DODGE 1500 2 AND 4WD

This kit contains all the parts you need to convert your 1998 - 2001 Dodge 1500 truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a Zinc plated finish for corrosion resistance
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 11.4” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• DOT Flex Hoses, axle shims, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated rotors) available
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto 1998 - 2001 Dodge Ram trucks with automatic or manual transmission.  This is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements. 

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.4 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT DISC BRAKE CONVERSION KIT, 1966-1975 FORD BRONCO, 1966-1972 F100 (4WD)

BOLTS ON DRUM BRAKE SPINDLE

This kit contains all the parts you need to convert your ’66-‘75 Ford Bronco or ’66-’72 Ford F100 (4WD) with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston, high-strength cast iron calipers
• New master cylinder
• Semi-metallic brake pads- D368
• Caliper Dust seals (D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 12.13” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel flex hoses
• Bolts directly on stock front drum spindles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated rotors) available
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC front disc brake conversion kit. This kit is designed to bolt directly onto a ’66-75 Ford Bronco or ’66-’72 Ford F100 (4WD).  This is a huge improvement over stock drums. You'll get better performance with a factory look.  

The upgraded calipers give modern braking capability in a compact design. Each caliper has a chrome steel piston with a large diameter piston bore. All brackets are e-coated for long life rust prevention.  12.13 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT DISC ‘BIG BRAKE’ CONVERSION KIT, 1966-1975 FORD BRONCO, 1966-1972 F100 (4WD)

This kit contains all the parts you need to convert your ’66-75 Ford Bronco or ’66-’72 Ford F100 (4WD) with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston light weight, high-strength cast iron calipers
• Calipers come finished with a E-coat plating throughout
• New master cylinder
• Semi-metallic brake pads- D370
• Caliper Dust seals (D.O.T. design)
• Two 12.13” diameter heavy duty rotors 
• Optional dimple drilled, slotted, plated rotors available.
• Includes e-coated Mounting brackets
• Stainless steel brake lines
• Fits on stock front spindles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA front rear disc brake conversion kit. This kit is designed to bolt directly onto a ’66-‘75 Ford Bronco or ’66-’72 Ford F100 (4WD).  This is a huge improvement over stock drums. You'll get better performance with a factory look.  

The upgraded calipers give modern braking capability in a compact design.  Each caliper has a chrome steel piston with a large diameter piston bore. All brackets are e-coated for long life rust prevention.  12.13 inch diameter vented, slotted and zinc plated rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications

REAR DISC brake CONVERSION KIT, 1998-2001 DODGE 1500 2 AND 4WD

This kit contains all the parts you need to convert your 1998 - 2001 Dodge 1500 truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a Zinc plated finish for corrosion resistance
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 11.4” diameter dimple drilled, slotted and plated rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• DOT Flex Hoses, axle shims, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto 1998 - 2001 Dodge Ram trucks with automatic or manual transmission.  This is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements. 

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.4 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT DISC ‘BIG BRAKE’ CONVERSION KIT, 1966-1975 FORD BRONCO, 1966-1972 F100 (4WD)

This kit contains all the parts you need to convert your ’66-75 Ford Bronco or ’66-’72 Ford F100 (4WD) with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston light weight, high-strength cast iron calipers
• Calipers come finished with a E-coat plating throughout
• New master cylinder
• Semi-metallic brake pads- D370
• Caliper Dust seals (D.O.T. design)
• Two 12.13” diameter dimple drilled, slotted and plated rotors 
• Includes e-coated Mounting brackets
• Stainless steel brake lines
• Fits on stock front spindles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA front rear disc brake conversion kit. This kit is designed to bolt directly onto a ’66-‘75 Ford Bronco or ’66-’72 Ford F100 (4WD).  This is a huge improvement over stock drums. You'll get better performance with a factory look.  

The upgraded calipers give modern braking capability in a compact design.  Each caliper has a chrome steel piston with a large diameter piston bore. All brackets are e-coated for long life rust prevention.  12.13 inch diameter vented, slotted and zinc plated rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications

FRONT DISC BRAKE CONVERSION KIT, 1966-1975 FORD BRONCO, 1966-1972 F100 (4WD)

BOLTS ON DRUM BRAKE SPINDLE

This kit contains all the parts you need to convert your ’66-‘75 Ford Bronco or ’66-’72 Ford F100 (4WD) with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston, high-strength cast iron calipers
• New master cylinder
• Semi-metallic brake pads- D368
• Caliper Dust seals (D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 12.13” diameter dimple drilled, slotted and plated rotors
• Includes e-coated Mounting brackets
• Stainless steel flex hoses
• Bolts directly on stock front drum spindles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC front disc brake conversion kit. This kit is designed to bolt directly onto a ’66-75 Ford Bronco or ’66-’72 Ford F100 (4WD).  This is a huge improvement over stock drums. You'll get better performance with a factory look.  

The upgraded calipers give modern braking capability in a compact design. Each caliper has a chrome steel piston with a large diameter piston bore. All brackets are e-coated for long life rust prevention.  12.13 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION KIT, 1998-2001 DODGE 1500 2 AND 4WD

This kit contains all the parts you need to convert your 1998 - 2001 Dodge 1500 truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a Zinc plated finish for corrosion resistance
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 11.4” diameter dimple drilled, slotted and plated rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• DOT Flex Hoses, axle shims, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power from your truck by installing this SSBC-USA rear disc brake conversion kit. This kit is designed to bolt directly onto 1998 - 2001 Dodge Ram trucks with automatic or manual transmission.  This is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements. 

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.4 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.