GM Products

1955-1958 CHEVY FULL SIZE IMPALA, BISCAYNE, BEL AIR FRONT NON-POWER DRUM/DISC BRAKE CONVERSION KIT-STOCK RIDE HEIGHT-1 (Single) PISTON with 11: ROTORS

Includes GM style single piston cast iron calipers; Caliper are zinc plated for corrosion resistance.  Bolts to stock drum brake spindles; Complete with dual bowl master cylinder, semi metallic pads, caliper mounting brackets

Simple and complete premium drum to disc brake conversion kit gives you original looking disc brakes.
Simple bolt on instructions and all the parts you need to convert from drum to disc brakes.

Zinc plated calipers with period correct inlet. New slider pins and anti rattle clips.
Complete with disc brake master cylinder, standard forged ride height spindles, USA made carbon metallic pads
Bolts to stock drum brake spindle.
Rotors available with optional dimple drilled, slotted and plated finish  
Includes master cylinder and USA Made proportioning valve
Complete with caliper mounting brackets, grease seals, wheel bearings, grease caps, DOT rubber flex hoses, spindle nuts and hardware

Rear 14" Dimple Drilled, Slotted and Zinc Plated Rotors 2011-2024 Chevy/GMC 2500/3500 (set of 2)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

A126-2 Rear Disc Brake Conversion w/ Built In Parking Brake - Black: 88-99 Chevy 1/2 ton truck, 2 wheel drive

Get up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 2WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 11.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

• All hardware included
• Single piston cast iron calipers with built in parking brakes
• Included “firm feel” master cylinder, increases pressure and stiffens pedal feel
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.5” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
• Optional Caliper powder coat colors available ( Red, Black)

**Note: Truck must have 10" drum brakes, will not fit if truck has 11" drum brakes

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance of the vehicle.

Rear Rotor Pair DDS Zinc Plated 2005-2020 Chevy/GM/Cadillac 1/2-Ton, manual parking brake only.

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

REAR DISC BRAKE CONVERSION KIT FOR 10" DRUM REAR BRAKES

1988-1999 GM 1/2 TON  4WD

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 10" rear drum brakes, will not fit if truck has 11" rear drum brakes

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Includes “firm feel” high volume master-cylinder for increased performance
• adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated rotors ) available
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT-STAGGERED SHOCKS, 1968-1981 GM F, X BODIES, 10/12 BOLT REAR END 

This kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

• **Note: will not work with C-clip eliminators

Kit feature:

• Single piston cast iron calipers with built in parking brakes
• Calipers come finished with a Zinc plating
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads- D347
• Caliper Dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 10.5” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available
• Optional Caliper powder coat colors available (Red, Black) 

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

Booster/Master Cylinder Combo, 9" Dual Diaphragm, Dual Bowl, 1964-1972 GM A & F Body.

Includes bench bleed kit.

Questions?  Call Customer Service at 716-775-6700 or e-mail CustomerService@ssbc-usa.com and we'll be happy to help you!

FRONT POWER DISC BRAKE CONVERSION KIT, 1955-1958 CHEVY IMPALA, BISCAYNE, BEL AIR

Bolts to stock drum brake spindle

**Note: Will not fit cars equipped with factory power steering mounted on the generator- (not enough room for the power booster)

This kit contains all the parts you need to convert your 1955-1958 Chevy Impala, Biscayne, or Bel Air with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston full size GM cast iron calipers
• Dual reservoir steel master cylinder
• 9” Single diaphragm booster with brackets
• Adjustable proportioning valve
• Semi-metallic brake pads- D52
• Two 11” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• New slider pins and anti-rattle clips
• Grease seals, wheel bearings, grease caps
• Bolts to stock drum brake spindle
• DOT Flex Hoses, and new hard lines
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available

Product Description

Get up to 30% more braking power, by installing an SSBC-USA front disc brake conversion kit. This direct bolt on kit is ideal for 1955-1958 Chevy Impala, Biscayne, and Bel Air front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design. Each caliper has a chrome steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA has been designing and manufacturing high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.  

BIG SAVINGS on the SSBC-USA BIG BRAKE BUNDLE

Bundle and save $300.00 when ordering the BARBARIAN BIG BRAKE BUNDLE from SSBC-USA, your Stop For AMERICAN STOPPING POWER. 

Introducing the most “WHOA” You can get for your ¾-Ton & 1-Ton truck (single rear wheel).  You get everything you need to stop your truck with time to spare.  This BARBARIAN BIG BRAKE BUNDLE includes our AMERICAN MADE FRONT & REAR  8 x Stainless Pistons, Billet Aluminum Calipers AND DSS Rotors for all 4 wheels. 

Highlights:  Made In The USA!  Our patented direct fit, 8-piston machined billet aluminum calipers, DDS rotors, stainless steel pistons,  fits behind factory wheels of your 2013-2019 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Big Brake Bundle - 4 Wheel Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

The 8-piston Big Brake Bundle Upgrade aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, DDS rotors, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Chevy/GMC 2500/3500 brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
  
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

4 Calipers complete with high-friction, low-dust semi-metallic brake pads

• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper

4 DDS Rotors:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent rust

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2013 Chevy 2500
• 2013 Chevy 3500
• 2013 GMC 2500
• 2013 GMC 3500
• 2014 Chevy 2500
• 2014 Chevy 3500
• 2014 GMC 2500
• 2014 GMC 3500
• 2015 Chevy 2500
• 2015 Chevy 3500
• 2015 GMC 2500
• 2015 GMC 3500
• 2016 Chevy 2500
• 2016 Chevy 3500
• 2016 GMC 2500
• 2016 GMC 3500
• 2017 Chevy 2500
• 2017 Chevy 3500
• 2017 GMC 2500
• 2017 GMC 3500
• 2018 Chevy 2500
• 2018 Chevy 3500
• 2018 GMC 2500
• 2018 GMC 3500
• 2019 Chevy 2500
• 2019 Chevy 3500
• 2019 GMC 2500
• 2019 GMC 3500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Front Dimple Drilled/Slotted & Zinc Plated Rotor Pair 2012-2020 F150 4WD

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

You need brakes that pack as big of a punch as your Chevy/GMC 1500 and Cadillac. The NEW, American-made 6-piston B6-Brawler Brake Caliper and DDS Rotors from SSBC-USA gives your half-ton Dodge Ram pickup truck the  stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2009-2020 Chevy Silverado/GMC Sierra 1500 and Cadillac. Designed and engineered to provide more stopping power, the B6-Brawler improves the overall look and style of either your everyday ride or prized, custom build. 

The 6-piston aluminum calipers are a direct replacement for factory 2-piston rear calipers. The SSBC-USA kit includes high-performance, severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your rear brake system with light-weight, large-bore American-made calipers. CNC-manufactured from quality materials, this SSBC-USA caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Everything Comes in One Box—The B6-Brawler is ready to bolt onto the rear axle.

*Custom powder coating options available!

The Latest Breakthrough in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 7 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Custom Colors and Engraving Available
• Anodized or Powder Coat Finish

B6-Brawler Rear Brake Kit Comes Fully-Assembled and Includes:

• 2 Loaded Rear Calipers
• 4 Slider Pins
• 4 Clips
• 8 Bleeders
• 12 Pistons
• 24Seals
• 14 Cap Screws
• 14 Washers
• 4 O-Rings

The B6-Brawler Rear Brake Kit Fits These Vehicles:

You need brakes that pack as big of a punch as your Chevy Silverado 1500, GMC 1500 or Cadillac. The NEW, American-made 8-piston B8-Brawler Brake Caliper from SSBC-USA gives your truck the stopping power, style and performance it needs to get the job done.

The front B8-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy Silverado/GMC Sierra 1500 and Cadillac. B8-Brawler overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance, severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Chevy, GMC or Cadillac front brake system with light-weight, large-bore American-made calipers. CNC-manufactured from quality materials, this SSBC-USA caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Everything Comes in One Box—The B8-Brawler is ready to bolt onto the front axle of your vehicle.

*Custom powder coating options available!

The Latest Breakthrough in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 7 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Custom Colors Available
• Anodized or Powder Coat Finish

B8-Brawler Front Brake Kit Comes Fully-Assembled and Includes:

• 2 Loaded Front Calipers
• 4 Slider Pins
• 4 Clips
• 8 Bleeders
• 16 Pistons
• 32 Seals
• 14 Cap Screws
• 14 Washers
• 4 O-Rings

The B8-Brawler Front Brake Kit Fits These Vehicles:

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons,  fits behind factory wheels, uses stock rotors, 2020-2024 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Brake Caliper Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy/GMC 2500/3500. Designed and engineered to provide more stopping power, the B8-Barbarian overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Chevy/GMC 2500/3500 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
  
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2020 Chevy 2500
  
• 2020 Chevy 3500
• 2020 GMC 2500
• 2020 GMC 3500
• 2021 Chevy 2500
• 2021 Chevy 3500
• 2021 GMC 2500
• 2021 GMC 3500
• 2022 Chevy 2500
• 2022 Chevy 3500
• 2022 GMC 2500
• 2022 GMC 3500
• 2023 Chevy 2500
• 2023 Chevy 3500
• 2023 GMC 2500
• 2023 GMC 3500
• 2024 Chevy 2500
• 2024 Chevy 3500
• 2024 GMC 2500
• 2024 GMC 3500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons,  fits behind factory wheels, uses stock rotors, 2020-2024 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Brake Caliper Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy/GMC 2500/3500. Designed and engineered to provide more stopping power, the B8-Barbarian overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Chevy/GMC 2500/3500 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Ridiculous stopping power
• Eye-popping looks
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
  
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2020 Chevy 2500
• 2020 Chevy 3500
• 2020 GMC 2500
• 2020 GMC 3500
• 2021 Chevy 2500
• 2021 Chevy 3500
• 2021 GMC 2500
• 2021 GMC 3500
• 2022 Chevy 2500
• 2022 Chevy 3500
• 2022 GMC 2500
• 2022 GMC 3500
• 2023 Chevy 2500
  
• 2023 Chevy 3500
• 2023 GMC 2500
• 2023 GMC 3500
• 2024 Chevy 2500
• 2024 Chevy 3500
• 2024 GMC 2500
• 2024 GMC 3500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons,  fits behind factory wheels, uses stock rotors, 2013-2019 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Brake Caliper Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy/GMC 2500/3500. Designed and engineered to provide  more stopping power, the B8-Barbarian overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your 2013-2019 Chevy/GMC 2500/3500 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2013 Chevy 2500
• 2013 Chevy 3500
• 2013 GMC 2500
• 2013 GMC 3500
• 2014 Chevy 2500
• 2014 Chevy 3500
• 2014 GMC 2500
• 2014 GMC 3500
• 2015 Chevy 2500
• 2015 Chevy 3500
• 2015 GMC 2500
• 2015 GMC 3500
• 2016 Chevy 2500
• 2016 Chevy 3500
• 2016 GMC 2500
• 2016 GMC 3500
• 2017 Chevy 2500
• 2017 Chevy 3500
• 2017 GMC 2500
• 2017 GMC 3500
• 2018 Chevy 2500
• 2018 Chevy 3500
• 2018 GMC 2500
• 2018 GMC 3500
• 2019 Chevy 2500
• 2019 Chevy 3500
• 2019 GMC 2500
• 2019 GMC 3500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits behind factory wheels, uses stock rotors, 2013-2019 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Brake Caliper Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy/GMC 2500/3500. Designed and engineered to provide more stopping power, the B8-Barbarian overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your 2013-2019 Chevy/GMC 2500/3500 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2013 Chevy 2500
• 2013 Chevy 3500
• 2013 GMC 2500
• 2013 GMC 3500
• 2014 Chevy 2500
• 2014 Chevy 3500
• 2014 GMC 2500
• 2014 GMC 3500
• 2015 Chevy 2500
• 2015 Chevy 3500
• 2015 GMC 2500
• 2015 GMC 3500
• 2016 Chevy 2500
• 2016 Chevy 3500
• 2016 GMC 2500
• 2016 GMC 3500
• 2017 Chevy 2500
• 2017 Chevy 3500
• 2017 GMC 2500
• 2017 GMC 3500
• 2018 Chevy 2500
• 2018 Chevy 3500
• 2018 GMC 2500
• 2018 GMC 3500
• 2019 Chevy 2500
• 2019 Chevy 3500
• 2019 GMC 2500
• 2019 GMC 3500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons,  fits behind factory wheels, uses stock rotors, 2013-2024 Chevy/GMC 2500/3500.  Custom colors and finishes available to match your truck/build. 

You need a brake that’s built as tough as your Chevy/GMC 2500/3500. The 8-piston, heavy-duty B8-Barbarian Brake Caliper Upgrade Kit from SSBC-USA gives your Chevy/GMC 2500/3500 truck the stopping power and performance it needs to get any job done. 

This rear brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD Chevy/GMC 2500/3500. Designed and engineered to provide  more stopping power, the B8-Barbarian overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston rear calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Chevy/GMC 2500/3500 rear brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

• 2013 Chevy 2500
• 2013 Chevy 3500
• 2013 GMC 2500
• 2013 GMC 3500
• 2014 Chevy 2500
• 2014 Chevy 3500
• 2014 GMC 2500
• 2014 GMC 3500
• 2015 Chevy 2500
• 2015 Chevy 3500
• 2015 GMC 2500
• 2015 GMC 3500
• 2016 Chevy 2500
• 2016 Chevy 3500
• 2016 GMC 2500
• 2016 GMC 3500
• 2017 Chevy 2500
• 2017 Chevy 3500
• 2017 GMC 2500
• 2017 GMC 3500
• 2018 Chevy 2500
• 2018 Chevy 3500
• 2018 GMC 2500
• 2018 GMC 3500
• 2019 Chevy 2500
• 2019 Chevy 3500
• 2019 GMC 2500
• 2019 GMC 3500
• 2020 Chevy 2500
• 2020 Chevy 3500
• 2020 GMC 2500
• 2020 GMC 3500
• 2021 Chevy 2500
• 2021 Chevy 3500
• 2021 GMC 2500
• 2021 GMC 3500
• 2022 Chevy 2500
• 2022 Chevy 3500
• 2022 GMC 2500
• 2022 GMC 3500
• 2023 Chevy 2500
• 2023 Chevy 3500
• 2023 GMC 2500
• 2023 GMC 3500
• 2024 Chevy 2500
• 2024 Chevy 3500
• 2024 GMC 2500
• 2024 GMC 3500

*Does not fit dually, single real wheel only.

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

REAR DISC BRAKE CONVERSION KIT , 1971-1996 GM FULL SIZE 10 & 12 BOLT WITH 11" DRUMS, 5 X 5 WHEEL BOLT PATTERN

This kit contains all the parts you need to convert your 1971-1996 GM- full size, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: will not work with C-clip eliminators

Kit features.

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a zinc plated finish and dust boots
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• includes dimple drilled, slotted and plated rotors
• Optional Caliper powder coat colors available (Red, Black)

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 71-96 GM- full size, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1/2 TON 2WD TRUCK & 1973-1991 FULL SIZE 2WD SUV (5 LUG)

This kit contains all the parts you need to convert your ‘73-87 GM ½ ton -2WD trucks and ’73-’91 full size 2WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features.

• Single piston cast iron calipers with built in parking brakes
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper Dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.35” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• High volume “firm feel” master cylinder available (1988-1999 vehicles)
• Optional rotor upgrades (dimple drilled, slotted and plated) available
• Optional Caliper powder coat colors available ( Red, Black)
  

Product Description

Get up to 30% more braking power from your GM truck, by installing this SSBC rear disc brake conversion kit. This kit is designed to bolt directly onto ‘73-‘87 GM ½ ton 2WD trucks and ’73-’91 full size 2WD SUV’s. This is a huge improvement over stock drums.  You'll get better performance with a factory look. 

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

 Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.