GM Products

1964-1974 GM A, F, X BODY FRONT NON-POWER DRUM/DISC BRAKE CONVERSION KIT

Get up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front non-power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention.  11-inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

• All hardware included
• Single piston, high-strength cast iron calipers
• New master Cylinder
• Adjustable proportioning valve
• New forged disc brake standard ride height spindles
• Calipers come with a zinc plated finish and dust boots
• Semi-metallic brake pads- D52
• Two 11” diameter dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers, new slider pins, and anti-rattle clips
• Grease seals, wheel bearings, grease caps
• DOT flex hoses and Steel adapter lines
• Simple instructions for bolt-on installation
  

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications.

FRONT POWER DISC BRAKE CONVERSION KIT 

1962 - 1967 CHEVY II, NOVA 

• Note: requires V8 (5 Lug) steering arms – not included*
• Note: Master cylinder supplied with kit will not bolt to stock booster on  vehicles with O.E. power drum brakes*

 This kit contains all the parts you need to convert your 1962-1967 Chevy II or Nova front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features

• New GM, single piston full size calipers
• Manual dual bowl cast steel master cylinder
• 9” single diaphragm booster with brackets
• New forged disc brake standard ride height spindles
• Adjustable proportioning valve
• Calipers come with zinc plated finish and dust boots
• Semi- metallic brake pads- D52
• Two 11” diameter dimple drilled/slotted rotors
• Includes original style caliper mounting brackets and splash shields
• Stainless steel spacers, slider pins and anti-rattle clips
• Grease seals, bearings, and grease caps
• DOT Flex Hoses, and new hard lines
• Simple instructions for bolt-on installation All Hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1962-1967 Chevy II or Nova front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT NON-POWER DISC BRAKE CONVERSION KIT

1962 - 1967 CHEVY II, NOVA 

• *Note: requires V8 (5 Lug) steering arms – not included*
• *Note: Master cylinder supplied with kit will not bolt to stock booster on vehicles with O.E. power drum brakes*

This kit contains all the parts you need to convert your 1962-1967 Chevy II or Nova, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistances.

• New GM, single piston full size calipers
• Manual dual bowl cast steel master cylinder
• Forged disc brake ride height spindles
• Adjustable proportioning valve
• Calipers come with zinc plated finish
• Semi- metallic brake pads- D52
• Two 11” diameter dimple drilled/slotted rotors
• Includes original style caliper mounting brackets and splash shields
• Stainless steel spacers, slider pins and anti-rattle clips
• Grease seals, bearings, and grease caps
• DOT Flex Hoses, and new hard lines
• Simple instructions for bolt-on installation with all Hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1962-1967 Chevy II or Nova front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT POWER DISC BRAKE CONVERSION KIT, 1964 - 1974 GM A, F, X BODY, bolts to factory drum brake spindle, fits 14” disc brake wheels  

This kit contains all the parts you need to convert your 1964-1974 GM- A, F, X body to front power disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock spindles and provide you with the performance and durability you expect from a modern brake system.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston, high-strength cast iron calipers
• Dual bowl manual Master Cylinder and powder booster
• Adjustable proportioning valve
• Semi- metallic brake pads- D368
• Two 11” diameter dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Anti-rattle clips
• Grease seals, wheel bearings, grease caps
• DOT Flex Hoses, and new hard lines
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Each caliper has a steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT NON-POWER DISC BRAKE CONVERSION KIT, 1964-1974 GM A, F, X BODY, 

Bolts to factory drum brake spindle

Fits 14” disc brake wheels

This kit contains all the parts you need to convert your 1964-1974 GM- A, F, X body to front non-power disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock spindles and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston, high-strength cast iron calipers
• Dual bowl manual Master Cylinder
• Adjustable proportioning valve
• Semi- metallic brake pads- D368
• Two 11” diameter dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Anti-rattle clips
• Grease seals, wheel bearings, grease caps
• DOT Flex Hoses, and new hard lines
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Each caliper has a steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market! 

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT POWER DISC BRAKE CONVERSION KIT WITH 2” DROP SPINDLES

1964 – 1974 GM A, F, X BODY 

This kit contains all the parts you need to convert your GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-800-448-7722 with any questions.

KIT FEATURES:

• Single piston, high-strength cast iron calipers
• Dual reservoir cast steel master cylinder
• 9” single diaphragm booster and brackets
• New forged disc brake 2” drop spindles
• Adjustable proportioning valve
• Calipers come with a zinc plated finish and dust boots
• Semi-metallic brake pads- D52
• Two 11” diameter dimple drilled/slotted zinc plated rotors
• Includes e-coated caliper mounting brackets and splash shields
• Stainless steel spacers, slider pins, and anti-Rattle Clips
• Grease seals, wheel bearings, grease caps
• DOT Flex Hoses, and steel adapter lines
• Simple instructions for bolt-on installation with all Hardware included 

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

Premium quality calipers are zinc-coated for ultimate corrosion resistance. Kit includes DOT Flex hoses and new steel adapter lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with some 14” and most 15” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1985-1990 CHEVROLET S-10 AND GMC SONOMA  

This kit contains all the parts you need to convert your 1985-1990 S-10 and Sonoma from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a powder coated finish
• Semi-metallic brake pads-D347
• Caliper Dust boots
• Two 10.5” diameter performance dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Hardware with parking brake cable adapters
• Stainless steel shim washers to center the caliper assembly
• DOT Flex Hoses, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for Chevy S-10 and GMC Sonoma. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA  designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1985-1990 CHEVROLET S-10 AND GMC SONOMA  

This kit contains all the parts you need to convert your 1985-1990 S-10 and Sonoma from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a powder coated finish
• Semi-metallic brake pads-D347
• Caliper Dust boots
• Two 10.5” diameter performance dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Hardware with parking brake cable adapters
• Stainless steel shim washers to center the caliper assembly
• DOT Flex Hoses, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for Chevy S-10 and GMC Sonoma. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA  designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1991- 2003 SONOMA AND S10

This kit contains all the parts you need to convert your 1991-2003, S-10 and Sonoma from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a powder coated finish
• Semi-metallic brake pads-D347
• Caliper Dust boots
• Two 10.5” diameter performance dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Hardware with parking brake cable adapters
• Stainless steel shim washers to center the caliper assembly
• DOT Flex Hoses, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for Chevy S-10 and GMC Sonoma. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA  designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1991- 2003 SONOMA AND S10

This kit contains all the parts you need to convert your 1991-2003, S-10 and Sonoma from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a powder coated finish
• Semi-metallic brake pads-D347
• Caliper Dust boots
• Two 10.5” diameter performance dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Hardware with parking brake cable adapters
• Stainless steel shim washers to center the caliper assembly
• DOT Flex Hoses, and new hard lines
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
  

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for Chevy S-10 and GMC Sonoma. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are powder-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA  designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION, 1988-1999 GM 1/2 TON 4WD, 

FOR TRUCKS WITH  11 INCH DRUM REAR BRAKES

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes

**Note: Will not fit the corporate 14 bolt rear differentials 

Kit features:

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Included “firm feel” high volume master-cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty slotted, dimple-drilled rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION, 1988-1999 GM 1/2 TON 4WD, 

FOR TRUCKS WITH  11 INCH DRUM REAR BRAKES

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes

**Note: Will not fit the corporate 14 bolt rear differentials 

Kit features:

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Included “firm feel” high volume master-cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT FOR 10" DRUM REAR BRAKES

1988-1999 GM 1/2 TON  4WD

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 10" rear drum brakes, will not fit if truck has 11" rear drum brakes

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Includes “firm feel” high volume master-cylinder for increased performance
• adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT FOR 10" DRUM REAR BRAKES. 1988-1999 GM 1/2 TON  4WD

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 10" rear drum brakes, will not fit if truck has 11" rear drum brakes

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Includes “firm feel” high volume master-cylinder for increased performance
• adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty dimple drilled/slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT FOR 10" DRUM REAR BRAKES

1988-1999 GM 1/2 TON  4WD

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 10" rear drum brakes, will not fit if truck has 11" rear drum brakes

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Includes “firm feel” high volume master-cylinder for increased performance
• adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty dimple drilled slotted rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

BIG SAVINGS on the SSBC-USA BIG BRAKE BUNDLE

Bundle and save $250.00 when ordering the BRAWLER LT BIG BRAKE BUNDLE from SSBC-USA, your Stop For AMERICAN STOPPING POWER. 

The Brawler LT offers an innovative braking solution that combines outstanding performance and style for your (2007 - 2019) Chevy/GMC 1500. Specifically designed with the everyday driver in mind, this kit is perfect for those who have larger wheels/tires and engage in moderate towing or performance activities. Here are some key features and details about this remarkable product:

Highlights:  Made In The USA! Our patented direct fit, 6-piston, machined billet aluminum calipers, stainless steel pistons, DS rotors, fits behind factory wheels, uses stock rotors, 2007-2019 Chevy/GMC 1500.  Custom colors and finishes available to match your truck/build.

You need a brake that’s built as tough as your Chevy/GMC 1500 . The 6-piston (front) and 4-piston (rear), heavy-duty B6/B4-Brawler LT Big Brake Bundle - 4 Wheel Upgrade Kit from SSBC-USA gives your Chevy/GMC 1500 truck the stopping power and performance it needs to get any job done. 

The 6/4-piston Big Brake Bundle Upgrade aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, DS rotors, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your OEM Chevy/GMC 1500 brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
  
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

4 Calipers complete with high-friction, low-dust semi-metallic brake pads

• 6/4 heavy duty, large bore stainless steel pistons per caliper
• 5 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• HD square-cut pressure seals & dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper

4 DS Rotors:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent rust

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

**Designed for external parking brake.

•    2007 Chevy 1500/GMC1500
•    2008 Chevy 1500/GMC1500
•    2009 Chevy 1500/GMC1500
•    2010 Chevy 1500/GMC1500
•    2011 Chevy 1500/GMC1500
•    2012 Chevy 1500/GMC1500
•    2013 Chevy 1500/GMC1500
•    2014 Chevy 1500/GMC1500
•    2015 Chevy 1500/GMC1500

•    2016 Chevy 1500/GMC1500
•    2017 Chevy 1500/GMC1500
•    2018 Chevy 1500/GMC1500
•    2019 Chevy 1500/GMC1500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

BIG SAVINGS on the SSBC-USA BIG BRAKE BUNDLE

Bundle and save $250.00 when ordering the BRAWLER LT BIG BRAKE BUNDLE from SSBC-USA, your Stop For AMERICAN STOPPING POWER. 

The Brawler LT offers an innovative braking solution that combines outstanding performance and style for your (2007 - 2019) Chevy/GMC 1500. Specifically designed with the everyday driver in mind, this kit is perfect for those who have larger wheels/tires and engage in moderate towing or performance activities. Here are some key features and details about this remarkable product:

Highlights:  Made In The USA! Our patented direct fit, 6-piston, machined billet aluminum calipers, stainless steel pistons, DS rotors, fits behind factory wheels, uses stock rotors, 2007-2019 Chevy/GMC 1500.  Custom colors and finishes available to match your truck/build.

You need a brake that’s built as tough as your Chevy/GMC 1500 . The 6-piston (front) and 4-piston (rear), heavy-duty B6/B4-Brawler LT Big Brake Bundle - 4 Wheel Upgrade Kit from SSBC-USA gives your Chevy/GMC 1500 truck the stopping power and performance it needs to get any job done. 

The 6/4-piston Big Brake Bundle Upgrade aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, DS rotors, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your OEM Chevy/GMC 1500 brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
  
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

4 Calipers complete with high-friction, low-dust semi-metallic brake pads

• 6/4 heavy duty, large bore stainless steel pistons per caliper
• 5 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• HD square-cut pressure seals & dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper

4 DS Rotors:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent rust

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

**Designed for external parking brake.

•    2007 Chevy 1500/GMC1500
•    2008 Chevy 1500/GMC1500
•    2009 Chevy 1500/GMC1500
•    2010 Chevy 1500/GMC1500
•    2011 Chevy 1500/GMC1500
•    2012 Chevy 1500/GMC1500
•    2013 Chevy 1500/GMC1500
•    2014 Chevy 1500/GMC1500
•    2015 Chevy 1500/GMC1500

•    2016 Chevy 1500/GMC1500
•    2017 Chevy 1500/GMC1500
•    2018 Chevy 1500/GMC1500
•    2019 Chevy 1500/GMC1500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

BIG SAVINGS on the SSBC-USA BIG BRAKE BUNDLE

Bundle and save $250.00 when ordering the BRAWLER LT BIG BRAKE BUNDLE from SSBC-USA, your Stop For AMERICAN STOPPING POWER. 

The Brawler LT offers an innovative braking solution that combines outstanding performance and style for your (2007 - 2019) Chevy/GMC 1500. Specifically designed with the everyday driver in mind, this kit is perfect for those who have larger wheels/tires and engage in moderate towing or performance activities. Here are some key features and details about this remarkable product:

Highlights:  Made In The USA! Our patented direct fit, 6-piston, machined billet aluminum calipers, stainless steel pistons, DS rotors, fits behind factory wheels, uses stock rotors, 2007-2019 Chevy/GMC 1500.  Custom colors and finishes available to match your truck/build.

You need a brake that’s built as tough as your Chevy/GMC 1500 . The 6-piston (front) and 4-piston (rear), heavy-duty B6/B4-Brawler LT Big Brake Bundle - 4 Wheel Upgrade Kit from SSBC-USA gives your Chevy/GMC 1500 truck the stopping power and performance it needs to get any job done. 

The 6/4-piston Big Brake Bundle Upgrade aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, DS rotors, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your OEM Chevy/GMC 1500 brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
  
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

4 Calipers complete with high-friction, low-dust semi-metallic brake pads

• 6/4 heavy duty, large bore stainless steel pistons per caliper
• 5 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• HD square-cut pressure seals & dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper

4 DS Rotors:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent rust

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

**Designed for external parking brake.

•    2007 Chevy 1500/GMC1500
•    2008 Chevy 1500/GMC1500
•    2009 Chevy 1500/GMC1500
•    2010 Chevy 1500/GMC1500
•    2011 Chevy 1500/GMC1500
•    2012 Chevy 1500/GMC1500
•    2013 Chevy 1500/GMC1500
•    2014 Chevy 1500/GMC1500
•    2015 Chevy 1500/GMC1500

•    2016 Chevy 1500/GMC1500
•    2017 Chevy 1500/GMC1500
•    2018 Chevy 1500/GMC1500
•    2019 Chevy 1500/GMC1500

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

BIG SAVINGS on the SSBC-USA BIG BRAKE BUNDLE

Bundle and save $250.00 when ordering the BRAWLER BIG BRAKE BUNDLE from SSBC-USA, your Stop For AMERICAN STOPPING POWER. 

Introducing the most “WHOA” You can get for your 1/2-Ton truck (4-wheel).  You get everything you need to stop your truck with time to spare.  This BRAWLER BIG BRAKE BUNDLE includes our AMERICAN MADE FRONT & REAR  8/6 Stainless Pistons, Billet Aluminum Calipers AND DS Rotors for all 4 wheels. 

Highlights:  Made In The USA! Our patented direct fit, 8-piston, machined billet aluminum calipers, stainless steel pistons, DS rotors, fits behind factory wheels, uses stock rotors, Chevy Silverado 1500, GMC 1500 or Cadillac XTS.  Custom colors and finishes available to match your truck/build.

You need a brake that’s built as tough as your GM 1500 or Cadillac XTS . The 8-piston (front) and 6-piston (rear), heavy-duty B8/B6-Brawler Big Brake Bundle - 4 Wheel Upgrade Kit from SSBC-USA gives your GM Truck or Cadillac XTS the stopping power and performance it needs to get any job done. 

The 8/6-piston Big Brake Bundle Upgrade aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, DS rotors, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your OEM brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
  
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

4 Calipers complete with high-friction, low-dust semi-metallic brake pads

• 8/6 heavy duty, large bore stainless steel pistons per caliper
• 5 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper

4 DS Rotors:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent rust

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.