Mercury Conversion Kits

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-R1 54mm ALUMINUM CALIPERS W/INTERNAL PARKING BRAKE-9" Torino style rear- MADE IN USA

Sport R1 Rear Disc Brake Conversion, With Parking Brake - Ford 9" Torino Rear End

Ford 9" large bearing - New Torino style flange.

• All hardware included.
• Sport R1 Single-Piston aluminum calipers with built-in parking brake
• Braided stainless flex lines
• High performance pads
• Dimple drilled, slotted and plated rotors

Calipers MADE IN THE USA.

Please note that the calipers in this kit are coated with a clear anodize finish. Upgrade to red or black calipers for an additional cost.

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT 8"/9" SMALL BEARING-4 PISTON ALUMINUM COMPETITION STREET CALIPERS-NO PARKING BRAKE-

Ford 8" and 9" small bearing, No parking brake.

Advanced technology has allowed us to develop a caliper that is lightweight, quiet, and durable enough to outlast and out perform the rest!

Replacement brake pads are available at any local parts store and are easy to replace without removing the calipers!

Competition Series disc brake conversion kit Includes:

• Street 4 Piston Aluminum Calipers
• 35mm Stainless Pistons
• Performance Pads
• Mounting brackets
• Big Bite cross drilled rotors
• Hardware.

Calipers, pistons brackets and hardware - MADE IN THE USA

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-LARGE 9" BEARING- 4 Piston COMPETITION STREET CALIPERS-Wheel kit only (pair)-USA MADE
1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-USA MADE

This Made in the USA kit contains all the parts you need to convert your ‘63-‘73 Ford 9” large bearing vehicle from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at (716) 775-6700 with any questions.

Get up to 30% more braking power by installing this, made in the USA, SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 1963-1973 Ford 9” Large Bearing vehicles. It is a huge improvement over stock drums.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers with clear anodized finish
• Stainless steel pistons
• Semi-metallic brake pads – D43
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Dimple-drilled slotted rotors
• Includes e-coated mounting brackets
• Stainless steel spacers, pad retainers
• Fits on stock rear axles
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

1968-1969 FORD, MERCURY FRONT POWER DRUM/DISC BRAKE CONVERSION KIT-O.E style SINGLE PISTON CALIPERS-

for Manual Transmission vehicles 

Includes:

• Ford style single piston cast iron calipers
• Dual bowl master cylinder
• New disc brake spindles
• Semi metallic pads
• E-coated caliper mounting brackets
• Splash shields
• Adjustable proportioning valve
• Brake lines
• Seals
• Bearings
• Grease caps
• New brake pedal
• optional dimple drilled, slotted and plated available 
• All hardware

For manual transmission cars only.  For manual transmission Cougars only.

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT 8"/9" SMALL BEARING-4 PISTON ALUMINUM COMPETITION STREET CALIPERS-NO PARKING BRAKE-

Wheel kit only (pair)

Ford 8" and 9" small bearing, No parking brake.

Advanced technology has allowed us to develop a caliper that is lightweight, quiet, and durable enough to outlast and out perform the rest!

Replacement brake pads are available at any local parts store and are easy to replace without removing the calipers!

Competition Series disc brake conversion kit Includes:

• Street 4 Piston Aluminum Calipers
• 35mm Stainless Pistons
• Performance Pads
• Mounting brackets
• Big Bite cross drilled rotors
• Hardware.

Calipers, pistons brackets and hardware - MADE IN THE USA

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT 8"/9" SMALL BEARING-4 PISTON ALUMINUM COMPETITION STREET CALIPERS-NO PARKING BRAKE-

Wheel kit only (pair)-USA MADE

Ford 8" and 9" small bearing, No parking brake.

Advanced technology has allowed us to develop a caliper that is lightweight, quiet, and durable enough to outlast and out perform the rest!

Replacement brake pads are available at any local parts store and are easy to replace without removing the calipers!

Competition Series disc brake conversion kit Includes:

• Street 4 Piston Aluminum Calipers
• 35mm Stainless Pistons
• Performance Pads
• Mounting brackets
• Big Bite cross drilled rotors
• Hardware.

Calipers, pistons brackets and hardware - MADE IN THE USA

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-LARGE 9" BEARING- 4 Piston COMPETITION STREET CALIPERS-Wheel kit only (pair)-USA MADE
1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-USA MADE

This Made in the USA kit contains all the parts you need to convert your ‘63-‘73 Ford 9” large bearing vehicle from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at (716) 775-6700 with any questions.

Get up to 30% more braking power by installing this, rear disc brake conversion kit. This direct bolt on kit is ideal for 1963-1973 Ford 9” Large Bearing vehicles. It is a huge improvement over stock drums.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers with clear anodized finish
• Stainless steel pistons
• Semi-metallic brake pads – D43
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Dimple-drilled slotted rotors
• Includes e-coated mounting brackets
• Stainless steel spacers, pad retainers
• Fits on stock rear axles
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-LARGE 9" BEARING- 4 Piston COMPETITION STREET CALIPERS-Wheel kit only (pair)-USA MADE
1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-USA MADE

This kit contains all the parts you need to convert your ‘63-‘73 Ford 9” large bearing vehicle from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at (716) 775-6700 with any questions.

Get up to 30% more braking power by installing this, rear disc brake conversion kit. This direct bolt on kit is ideal for 1963-1973 Ford 9” Large Bearing vehicles. It is a huge improvement over stock drums.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers with clear anodized finish
• Stainless steel pistons
• Semi-metallic brake pads – D43
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Dimple-drilled slotted rotors
• Includes e-coated mounting brackets
• Stainless steel spacers, pad retainers
• Fits on stock rear axles
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-8-9" SMALL BEARING- 1 PISTON-SPORT R1-54MM ALUMINUM CALIPERS WITH INTERNAL PARKING BRAKE-USA MADE

Ford 8" and 9" small bearing.

• All hardware included. Caliper includes built-in parking brake
• Braided stainless flex lines
• Sport R1 Single-Piston aluminum calipers
• High performance pads
• Dimple drilled, slotted and plated rotors
  

Calipers MADE IN THE USA. Please note that the calipers in this kit are powder coated red. 

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-8-9" SMALL BEARING- 1 PISTON-SPORT R1-54MM ALUMINUM CALIPERS WITH INTERNAL PARKING BRAKE-USA MADE

Ford 8" and 9" small bearing.

• All hardware included. Caliper includes built-in parking brake
• Braided stainless flex lines
• Sport R1 Single-Piston aluminum calipers
• High performance pads
• Dimple drilled, slotted and plated rotors
  

Calipers MADE IN THE USA. Please note that the calipers in this kit are powder coated black. 

1963-1973 FORD, MERCURY REAR DRUM/DISC BRAKE CONVERSION KIT-8-9" SMALL BEARING- 1 PISTON-SPORT R1-54MM ALUMINUM CALIPERS WITH INTERNAL PARKING BRAKE-USA MADE

Ford 8" and 9" small bearing.

• All hardware included. Caliper includes built-in parking brake
• Braided stainless flex lines
• Sport R1 Single-Piston aluminum calipers
• High performance pads
• Dimple drilled, slotted and plated rotors 

Calipers MADE IN THE USA. Please note that the calipers in this kit are coated with a clear anodize finish. Upgrade to powder coated red or black calipers for an additional cost.