How to Find Replacement Pads and Rotors for Your SSBC-USA Brake Kit

Need replacement brake pads or rotors for an SSBC-USA brake kit? Start with the kit part number and the components currently installed. Once a vehicle has a brake conversion or caliper upgrade, its original year, make and model may no longer identify the correct service parts.

The SSBC-USA Replacement Parts Finder lets you search by kit SKU, part number or keyword. Here is how to narrow the search before ordering.

1. Find Your Original Kit Part Number

Check your order confirmation, invoice, installation instructions or original packaging for the full kit SKU. Record the complete number, including any suffixes, rather than searching only for the product family.

Also note whether the kit was installed on the front or rear axle. If the vehicle has different upgrades at each end, identify each system separately. Knowing that you have B8-Barbarian calipers or a drum-to-disc conversion is a starting point, but it is not a complete replacement-part specification.

2. Search the Replacement Parts Finder

Open the replacement-parts finder and enter the original kit SKU. If you already have a confirmed component part number, search that number directly. Keyword searches can help locate a product category, but the individual listing must still match your system.

Review the replacement part's description, application details and quantity supplied. Do not assume a listing includes both axles, a rotor pair or a complete vehicle's worth of pads unless it says so.

3. Match Pads to the Installed Caliper

Replacement pads need to match the caliper actually installed on the vehicle. A stock pad lookup based only on vehicle year may return the wrong shape for an upgraded caliper.

• Identify the original kit and caliper part number where available.
• Confirm front or rear position.
• Check the pad shape and listed caliper compatibility.
• Review the compound and any backing-shim or hardware details stated on the product page.

Piston count or appearance alone is not enough to select a pad. Do not assume two calipers use the same pads because they look similar or belong to the same broad product family.

4. Match Rotors to the Kit Configuration

Some caliper upgrades retain compatible factory-style rotors; rotor-equipped kits include the application-specific rotors listed for that kit. A drum-to-disc conversion may use a different rotor arrangement from the vehicle's original brakes.

Use the original kit specification and the replacement listing to confirm the rotor part number, axle position, dimensions, bolt pattern and any hub or offset requirements. Where a product specifies left and right rotors, confirm the correct side and whether the listing supplies one rotor or a pair.

Do not choose solely by diameter or appearance. A rotor that looks similar may have a different thickness, mounting arrangement or offset.

What If You Do Not Know the Kit Number?

Gather the vehicle year, make and model, front or rear location, any available caliper markings, and clear photos of the installed components. Include information about axle swaps or earlier brake modifications, along with an old invoice or installation sheet if you have one.

Call SSBC-USA at (716) 775-6700 or email orders@ssbc-usa.com with those details. The team can help investigate the application before you order. Older systems may need additional identification; do not assume a current part is interchangeable based only on the brand name.

Frequently Asked Questions

Can I order pads using only my vehicle's year and model?

That may be insufficient after a brake upgrade or conversion. Match the installed caliper and kit, then confirm the replacement listing.

Does every SSBC-USA caliper upgrade require a special rotor?

No. Rotor requirements depend on the specific kit. Check whether your original upgrade retained a compatible factory-style rotor or used a different rotor configuration.

Can I use a replacement part that looks the same?

Appearance does not establish compatibility. Confirm the part number and application before ordering.

Find Your Replacement Parts

Start with your kit number and visit the SSBC-USA Replacement Parts Finder. If the match is unclear, contact the team with your kit and component details before purchasing. Follow the applicable installation and service instructions when replacing brake components.