Ford Products

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers
• Stainless steel pistons
• Caliper Dust seals ( D.O.T. design)
  
• Stainless steel shim washers to center the caliper assembly
• Stainless steel pad retainers
  
• Fits on stock rear axles
• Simple instructions for bolt-on installation

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers
• Stainless steel pistons
• Caliper Dust seals ( D.O.T. design)
  
• Stainless steel shim washers to center the caliper assembly
• Stainless steel pad retainers
  
• Fits on stock rear axles
• Simple instructions for bolt-on installation

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Each caliper has stainless steel pistons with a large diameter piston bore. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Calipers are made in the USA, No parking brake

• 4 piston, light-weight aluminum competition street calipers
• Stainless steel pistons
• Caliper Dust seals ( D.O.T. design)
  
• Stainless steel shim washers to center the caliper assembly
• Stainless steel pad retainers
  
• Fits on stock rear axles
• Simple instructions for bolt-on installation

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications.

Highlights:  Proudly Made In The USA, direct fit, 8-piston machined billet aluminum caliper, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150. 

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box

Highlights:  Proudly Made In The USA, direct fit, 6-piston machined billet aluminum calipers, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150.  

American-made 6-piston B6-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 6 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Highlights:  Proudly Made In The USA, direct fit, 6-piston machined billet aluminum calipers, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150.  

American-made 6-piston B6-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 6 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Highlights:  Proudly Made In The USA, direct fit, 6-piston machined billet aluminum calipers, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150.  

American-made 6-piston B6-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 6 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Highlights:  Proudly Made In The USA, direct fit, 8-piston machined billet aluminum caliper, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150. 

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box

Highlights:  Proudly Made In The USA, direct fit, 8-piston machined billet aluminum caliper, stainless steel pistons, ridiculous stopping power, eye-popping looks, fits stock rotors, 2012-2020 Ford F-150. 

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box

Standard Rear Disc Brake Conversion, With Parking Brake, Ford 9" Large Bearing, Ford And GM Bolt Pattern

Get up to 30% more braking power by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for Ford 9” large bearing vehicles with the old style flange. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated with a clear anodized finish for ultimate corrosion resistance. Each caliper has a steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

Kit Includes:

• All necessary hardware included
• Single piston cast iron calipers with built in parking brakes
• Adapters allow you to re-use your factory parking brake cable
• DOT Flex hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads - P/N 1047
• Caliper Dust boots
• Two 10.5” diameter heavy duty vented rotors w/ DS option 
• E-coated Mounting brackets
• Stainless steel spacers
• Stainless steel shim washers to center the caliper assembly
• Simple instructions for bolt-on installation

Optional Caliper powder coat colors available ( Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

Highlights:  Proudly Made In The USA, direct fit, 6-piston machined billet aluminum calipers, DDS rotors stainless steel pistons, fits stock rotors, 2012-2020 Ford F-150.  Custom colors and finishes available to match your truck/build.

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 6-piston B6-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  The B6-Brawler kit includes high-performance, ceramic brake pads, all necessary hardware, and detailed installation instructions.

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 6 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Fully Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

The B6-Brawler Front Brake Kit Fits These Vehicles:

** NOTE:  These calipers fit Ford F-150s with a manual parking brakes ONLY

• 2012 Ford F-150 4WD
• 2013 Ford F-150 4WD
• 2014 Ford F-150 4WD
• 2015 Ford F-150 4WD
• 2016 Ford F-150 4WD
• 2017 Ford F-150 4WD
• 2018 Ford F-150 4WD
• 2019 Ford F-150 4WD
• 2020 Ford F-150 4WD

Consult fitment diagram for your specific application.

Highlights:  Proudly Made In The USA, direct fit, 6-piston machined billet aluminum calipers, DDS rotors stainless steel pistons, fits stock rotors, 2012-2020 Ford F-150.  Custom colors and finishes available to match your truck/build.

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 6-piston B8-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The rear B6-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  The B6-Brawler kit includes high-performance, ceramic brake pads, all necessary hardware, and detailed installation instructions.

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 6 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 6 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

The B6-Brawler Front Brake Kit Fits These Vehicles:

** NOTE:  These calipers fit Ford F-150s with a manual parking brakes ONLY

• 2012 Ford F-150 4WD
• 2013 Ford F-150 4WD
• 2014 Ford F-150 4WD
• 2015 Ford F-150 4WD
• 2016 Ford F-150 4WD
• 2017 Ford F-150 4WD
• 2018 Ford F-150 4WD
• 2019 Ford F-150 4WD
• 2020 Ford F-150 4WD

Consult fitment diagram for your specific application.

Highlights:  Proudly Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS rotors, stainless steel pistons, fits stock rotors, 2012-2020 Ford F-150.  Custom colors and finishes available to match your truck/build.

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 8-piston B8-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the stopping power, style and performance it needs to get the job done.

The front B8-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  The B8-Brawler kit includes high-performance, ceramic brake pads, all necessary hardware, and detailed installation instructions.

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

** Please note that the Ford rotor offers a very small (5/8”) gap between the rotor face and the back of the wheel. This arrangement often requires a small wheel spacer.  Therefore, it is imperative that you check the wheel fitment diagram to determine if your application requires a wheel spacer.

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

The B8-Brawler Front Brake Kit Fits These Vehicles:

• 2012 Ford F-150 4WD
• 2013 Ford F-150 4WD
• 2014 Ford F-150 4WD
• 2015 Ford F-150 4WD
• 2016 Ford F-150 4WD
• 2017 Ford F-150 4WD
• 2018 Ford F-150 4WD
• 2019 Ford F-150 4WD
• 2020 Ford F-150 4WD

Consult fitment diagram for your specific application.

Highlights:  Proudly Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS rotors, stainless steel pistons, fits stock rotors, 2012-2020 Ford F-150.  Custom colors and finishes available to match your truck/build.

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 8-piston B8-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The front B8-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  The B8-Brawler kit includes high-performance, ceramic brake pads, all necessary hardware, and detailed installation instructions.

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

** Please note that the Ford rotor offers a very small (5/8”) gap between the rotor face and the back of the wheel. This arrangement often requires a small wheel spacer.  Therefore, it is imperative that you check the wheel fitment diagram to determine if your application requires a wheel spacer.

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Fully-Assembled, Easy to Install 

• Improves the Look of Any Vehicle
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

The B8-Brawler Front Brake Kit Fits These Vehicles:

• 2012 Ford F-150 4WD
• 2013 Ford F-150 4WD
• 2014 Ford F-150 4WD
• 2015 Ford F-150 4WD
• 2016 Ford F-150 4WD
• 2017 Ford F-150 4WD
• 2018 Ford F-150 4WD
• 2019 Ford F-150 4WD
• 2020 Ford F-150 4WD

Consult fitment diagram for your specific application.

Dimple Drilled, Slotted and Zinc Plated Rotor Rear 1999-05 Excursion 4WD right side

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent

 SSBC-USA Caliper Assembly, Left, Rear, Aluminum, 54mm Piston, With Parking Brake, Red Powder Coat.

Supersedes A22195R.

Questions?  Call Customer Service at 716-775-6700 or e-mail CustomerService@ssbc-usa.com and we'll be happy to help you!

SSBC-USA Caliper Assembly, Left, Rear, Aluminum, 54mm Piston, With Parking Brake, Black Powder Coat.

Supersedes A22195B.

Questions?  Call Customer Service at 716-775-6700 or e-mail CustomerService@ssbc-usa.com and we'll be happy to help you!

Proudly Made In The USA, direct fit, 8-piston machined billet aluminum calipers, stainless steel pistons,  fits stock rotors, 2012-2020 Ford F-150.  Custom colors and finishes available to match your truck/build.

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 8-piston B8-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

The front B8-Brawler caliper kit is Made in the USA from high-quality, aircraft-grade T6061 billet aluminum and is designed to bolt directly onto your 2012-2020 Ford F-150 4WD.  The B8-Brawler kit includes high-performance, ceramic brake pads, all necessary hardware, and detailed installation instructions.

CHECK FITMENT DIAGRAM – Due to the large variation in OEM wheel offerings, you MUST check the fitment diagram to determine if wheel spacers are required.  SSBC-USA is not responsible for damage to the calipers due to incorrect fitment.

** Please note that the Ford rotor offers a very small (5/8”) gap between the rotor face and the back of the wheel. This arrangement often requires a small wheel spacer.  Therefore, it is imperative that you check the wheel fitment diagram to determine if your application requires a wheel spacer.

The Latest Brake through in Knockout Engineering and Design from SSBC-USA.

• 100% Proudly Made in the USA
• Machined from Lightweight, High Strength Billet Aluminum
• 8 Heavy Duty Stainless Steel Pistons per Caliper
• High-Friction, Low-Dust Brake Pads
• 4 Full-Size Stainless Steel Bleeders
• 5 Bridge Bolts per Caliper for Maximum Stiffness
• Stainless Steel Pad Clips
• Dual Seals (Pressure and Dust)

Fully-Assembled, Easy to Install and Ready to Beat the Brakes Off the Competition.

• Improves the Look of Any Vehicle
• Delivers Knockout American Stopping Power
• Direct Fit—No Brackets Required
• Single Source for All Components—Everything Arrives in One Box
• Clear Anodized or Powder Coat Finish (Red, Black)

Options – Contact us for details: 

• Rotor upgrades available (dimple drilled, slotted and plated )
• Custom powder coating to match your vehicle/build

The B8-Brawler Front Brake Kit Fits These Vehicles:

• 2012 Ford F-150 4WD
• 2013 Ford F-150 4WD
• 2014 Ford F-150 4WD
• 2015 Ford F-150 4WD
• 2016 Ford F-150 4WD
• 2017 Ford F-150 4WD
• 2018 Ford F-150 4WD
• 2019 Ford F-150 4WD
• 2020 Ford F-150 4WD

Consult fitment diagram for your specific application.

Master Cylinder, New, Original Style, Single Bowl, Disc Brake,1965-1966 Ford.

Questions?  Call Customer Service at 716-775-6700 or e-mail CustomerService@ssbc-usa.com and we'll be happy to help you!