Disc Brake Conversions

1964 –1974 GM A, F, X BODY FRONT NON-POWER DISC BRAKE CONVERSION KIT WITH ALUMINUM 2- PISTON CALIPERS

This kit contains all the parts you need to convert your ’64-’74 GM- A, F, X body non-power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

Bullet points

• 2-piston light weight, Super Twin HD billet aluminum calipers made in the USA
• Dual bowl steel cast Master cylinder
• New forged disc brake standard ride height spindles
• Adjustable proportioning valve
• Calipers come with a clear anodized finish
• Dual O-ring system (pressure and seal) for optimal sealing from fluid leaks and dirt
• Semi-metallic brake pads- D52
• Stainless steel shim washers to center the caliper assembly
• Two 11” diameter turbo slotted rotors with zinc plating
• Includes original style caliper mounting brackets and splash shields
• Stainless steel spacers, flex lines, and anti-rattle clips
• Grease seals, bearings, and grease caps
• Simple instructions for bolt-on installation with All Hardware included
• Includes Optional rotor upgrades (dimple drilled and slotted) 
• Optional Caliper powder coat colors available (Red, Black)

Product Description

Get up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has heavy duty, thick walled stainless steel pistons.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1/2 TON  4WD TRUCK

Sport R1 aluminum caliper with parking brake

This Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 716-775-6700 for assistance.

Kit features:

• Fits into most 15” Rims
• Sport R1, single piston light-weight billet aluminum calipers with built in parking brakes
• Two 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating
• Included adapters allow you to re-use your factory parking brake cables
• Kit comes with stainless steel braided flex hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Stainless Steel pistons
• Semi-metallic brake pads- D154
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (dimple drilled and slotted) available
• Optional Caliper powder coat colors available (Red, Black)
  

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.

This conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.

Kit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled, slotted and plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.

This disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service/ technical support at 1-716-775-6700.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1/2 TON  4WD TRUCK

Sport R1 aluminum caliper with parking brake

This Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 716-775-6700 for assistance.

Kit features:

• Fits into most 15” Rims
• Sport R1, single piston light-weight billet aluminum calipers with built in parking brakes
• Two 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating
• Included adapters allow you to re-use your factory parking brake cables
• Kit comes with stainless steel braided flex hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Stainless Steel pistons
• Semi-metallic brake pads- D154
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• 
  
• Optional Caliper powder coat colors available (Red, Black)
  

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.

This conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.

Kit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.

This disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service/ technical support at 1-716-775-6700.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1/2 TON  4WD TRUCK

Sport R1 aluminum caliper with parking brake

This Made in the USA kit contains all the parts you need to convert your 1973-1987 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 716-775-6700 for assistance.

Kit features:

• Fits into most 15” Rims
• Sport R1, single piston light-weight billet aluminum calipers with built in parking brakes
• Two 11.4” diameter heavy duty, dimple drilled and slotted rotors with zinc plating
• Included adapters allow you to re-use your factory parking brake cables
• Kit comes with stainless steel braided flex hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Stainless Steel pistons
• Semi-metallic brake pads- D154
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• 
  
• Optional Caliper powder coat colors available (Red, Black)
  

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums.

This conversion kit gives you modern braking capability with an upgraded look. Premium quality USA made calipers come standard with high-strength, thick walled stainless steel pistons; and integrated parking brake for a sleek, all-inclusive design that mounts right up to your stock axle.

Kit comes with e-coated brackets, stainless steel spacers, and stainless steel flex hoses for a new look that will last for years. 11.4 in diameter, dimple drilled, slotted and zinc plated rotors provide maximum durability. Parking brake cable adapters will allow you to reuse your factory cable with our American made billet aluminum calipers.

This disc brake kit will work with most 15” rims. Please consult our wheel fitment diagram, or the last page of installation instructions to confirm clearances. If you have any questions, please contact SSBC customer service/ technical support at 1-716-775-6700.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION KIT, 1992-1999 GM 1/2 TON  2WD  

For 11 inch drum rear brakes

This kit contains all the parts you need to convert your 1992-1999 GM ½ ton - 2WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston cast iron calipers with built in parking brakes
• Included “firm feel” high volume master- cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.35” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
• Optional Caliper powder coat colors available ( Red, Black)
  

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 2WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION KIT, 1992-1999 GM 1/2 TON  2WD  

For 11 inch drum rear brakes

This kit contains all the parts you need to convert your 1992-1999 GM ½ ton - 2WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston cast iron calipers with built in parking brakes
• Included “firm feel” high volume master- cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.35” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
• Optional Caliper powder coat colors available ( Red, Black)
  

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 2WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION KIT, 1992-1999 GM 1/2 TON  2WD  

For 11 inch drum rear brakes

This kit contains all the parts you need to convert your 1992-1999 GM ½ ton - 2WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston cast iron calipers with built in parking brakes
• Included “firm feel” high volume master- cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.35” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
• Optional Caliper powder coat colors available ( Red, Black)
  

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 2WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.