GM Conversion Kits

REAR DISC BRAKE CONVERSION KIT, NON STAGGERED SHOCKS 

1968-1981 GM F, X BODIES, 10/12 BOLT REAR END 

This kit contains all the parts you need to convert your 1968-1981 GM- F and X body, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

• **Note: will not work with C-clip eliminators

Kit feature:

• Single piston cast iron calipers with built in parking brakes
• Calipers come finished with a Zinc plating
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads- D347
• Caliper Dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 10.5” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available
• Optional Caliper powder coat colors available (Red, Black)

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1968-1981 GM- F and X body, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT POWER DISC BRAKE CONVERSION KIT WITH 2” DROP SPINDLES

1964 – 1974 GM A, F, X BODY 

This kit contains all the parts you need to convert your GM- A, F, X body front power vehicle, with automatic or manual transmission, from drum to disc brakes.  Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-800-448-7722 with any questions.

KIT FEATURES:

• Single piston, high-strength cast iron calipers
• Dual reservoir cast steel master cylinder
• 9” single diaphragm booster and brackets
• New forged disc brake 2” drop spindles
• Adjustable proportioning valve
• Calipers come with a zinc plated finish and dust boots
• Semi-metallic brake pads- D52
• Two 11” diameter heavy duty vented rotors
• Includes e-coated caliper mounting brackets and splash shields
• Stainless steel spacers, slider pins, and anti-Rattle Clips
• Grease seals, wheel bearings, grease caps
• DOT Flex Hoses, and steel adapter lines
• Simple instructions for bolt-on installation with all Hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated ) available 

Product Description

Get up to 30% more braking power, by installing this SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for GM- A, F and X body front power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

Premium quality calipers are zinc-coated for ultimate corrosion resistance. Kit includes DOT Flex hoses and new steel adapter lines.  All brackets are e-coated for long life rust prevention.  11 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with some 14” and most 15” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

1962-1981 GM 10/12 BOLT REAR, DRUM/DISC BRAKE CONVERSION KIT-4 PISTON COMP STREET CALIPERS-NON-STAGGERED SHOCKS-Wheel kit only (PAIR)-USA MADE

Get up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for GM- 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with an improved look.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention. 11 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tires. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

**Note: will not work with C-clip eliminators, Made in the USA, No parking brake

• Competition street 4 piston, light-weight aluminum calipers
• Calipers come with a zinc plated finish
• Semi-metallic brake pads- D43
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 11” diameter dimple drilled, slotted and plated rotors are included 
• Includes e-coated mounting brackets
• Stainless steel flex hoses and spacers
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

REAR DISC BRAKE CONVERSION KIT, 1955-1968 GM full size 10/12 BOLT 

This kit contains all the parts you need to convert your 1955-1968 GM full size, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: will not work with C-clip eliminators

Kit Features:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a zinc plated finish and dust boots
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 10.5” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available
• Optional Caliper powder coat colors available (Red, Black) 

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1955-1968 GM, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washer

REAR DISC BRAKE CONVERSION KIT, 1955-1968 GM full size 10/12 BOLT 

This kit contains all the parts you need to convert your 1955-1968 GM full size, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: will not work with C-clip eliminators

Kit Features:

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a zinc plated finish and dust boots
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads- D347
• Stainless steel shim washers to center the caliper assembly
• Two 10.5” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available
• Optional Caliper powder coat colors available (Red, Black) 

Product Description

Get up to 30% more braking power, by installing an SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1955-1968 GM, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  10.5 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC customer service.

SSBC-designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC brake CONVERSION, 1988-1999 GM 1/2 TON 4WD, 

FOR TRUCKS WITH  11 INCH DRUM REAR BRAKES

This Made in the USA kit contains all the parts you need to convert your 1988-1999 GM ½ ton - 4WD truck with automatic or manual transmission from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: Truck must have 11in drum rear brakes, will not fit if truck has 10in drum rear brakes

**Note: Will not fit the corporate 14 bolt rear differentials 

Kit features:

• High-strength billet aluminum calipers with stainless steel pistons, and internal parking brake
• Included “firm feel” high volume master-cylinder for increased braking performance
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads- D369
• Caliper Dust seals ( D.O.T. design)
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (slotted, dimple-drilled, plated) available
• Optional Caliper powder coat colors available ( Red, Black)

Product Description

Get up to 30% more braking power by installing this, made in the USA, SSBC rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 4WD Chevy/GMC trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are anodized for ultimate corrosion resistance.  Each caliper has a stainless steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

REAR DISC BRAKE CONVERSION KIT, 1973-1987 GM 1/2 TON 2WD TRUCK & 1973-1991 FULL SIZE 2WD SUV (5 LUG)

This kit contains all the parts you need to convert your ‘73-87 GM ½ ton -2WD trucks and ’73-’91 full size 2WD SUV from drum to disc brakes. Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features.

• Single piston cast iron calipers with built in parking brakes
• Included adapters allow you to re-use your factory parking brake cables
• Kit includes DOT Flex Hoses, axle shims, and new hard lines
• Calipers are finished with a Zinc plating
• Semi- metallic brake pads- D347
• Caliper Dust boots
• Stainless steel shim washers to center the caliper assembly
• Two 11.35” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• High volume “firm feel” master cylinder available (1988-1999 vehicles)
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
• Optional Caliper powder coat colors available ( Red, Black)
  

Product Description

Get up to 30% more braking power from your GM truck, by installing this SSBC rear disc brake conversion kit. This kit is designed to bolt directly onto ‘73-‘87 GM ½ ton 2WD trucks and ’73-’91 full size 2WD SUV’s. This is a huge improvement over stock drums.  You'll get better performance with a factory look. 

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

 Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.35 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

1967-1970 GM / CHEVY C10 (6 LUG) 2WD FRONT POWER DRUM/DISC BRAKE CONVERISON KIT-1 (SINGLE) PISTON-6 LUG

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.
SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

This kit contains all the parts you need to convert your 1967-1970 GM ½ ton Truck with automatic or manual transmission from drum to disc brakes.

Manufactured from quality materials, these front conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Includes:

• GM truck standard single piston cast iron calipers
• Plain rotors with option for Turbo Slotted rotors or Big Bite cross drilled rotors available
• Semi metallic brake pads - D368
• All hardware included
• Dual reservoir cast steel master cylinder
• 9” booster with required brackets
• DOT Flex Hoses, axle shims, and new hard line
• Caliper dust boots
• Two 11.61” diameter heavy duty vented rotors
• E-coated Mounting brackets
• Simple instructions for bolt-on installation

Optional rotor upgrades (dimple drilled, slotted and plated ) available
Optional Caliper powder coat colors available (Red, Black)

Fits into most 15” Rims, Bolts to factory drum brake spindles (6 lug).

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

Get up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 1/2 ton 2WD GM trucks that have bigger wheels. It is a huge improvement over stock drums. You'll get dependable performance with a factory look.
The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 11.61 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

1964-1974 GM A, F, X BODY FRONT NON-POWER DRUM/DISC BRAKE CONVERSION KIT

Get up to 30% more braking power, by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal GM- A, F, X body front non-power vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance. All brackets are e-coated for long life rust prevention.  11-inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

• All hardware included
• Single piston, high-strength cast iron calipers
• New master Cylinder
• Adjustable proportioning valve
• New forged disc brake standard ride height spindles
• Calipers come with a zinc plated finish and dust boots
• Semi-metallic brake pads- D52
• Two 11” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers, new slider pins, and anti-rattle clips
• Grease seals, wheel bearings, grease caps
• DOT flex hoses and Steel adapter lines
• Simple instructions for bolt-on installation
• Optional rotor upgrades (dimple drilled, slotted and plated ) available
  

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications.

1964-1974 GM A, F, X BODY FRONT LOWER ALUMINUM 2 PISTON DISC BRAKE CONVERSION KIT

Upgrade your GM A, F and X Body front brakes to Aluminum caliper. Our Billet Aluminum calipers give you the stopping power of a 2 piston Caliper without the wheel clearance issues. Maximum braking power with the flexibility of using Most 15" wheels

Premium quality calipers are zinc-coated for ultimate corrosion resistance. 

• Single piston, high-strength cast iron calipers
  
• Calipers come with a zinc plated finish and dust boots

Premium quality calipers are zinc-coated for ultimate corrosion resistance. 

• Single piston, high-strength cast iron calipers
  
• Calipers come with a zinc plated finish and dust boots

• 9” single diaphragm booster with brackets
• Dual reservoir steel cast master cylinder

Standard Rear Disc Brake Conversion, With Parking Brake, Ford 9" Large Bearing, Ford And GM Bolt Pattern

Get up to 30% more braking power by installing this SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for Ford 9” large bearing vehicles with the old style flange. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated with a clear anodized finish for ultimate corrosion resistance. Each caliper has a steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 10.5 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 14” wheels and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

Kit Includes:

• All necessary hardware included
• Single piston cast iron calipers with built in parking brakes
• Adapters allow you to re-use your factory parking brake cable
• DOT Flex hoses, axle shims, and new hard lines
• Calipers are coated with a clear anodized finish
• Semi-metallic brake pads - P/N 1047
• Caliper Dust boots
• Two 10.5” diameter heavy duty vented rotors w/ DS option 
• E-coated Mounting brackets
• Stainless steel spacers
• Stainless steel shim washers to center the caliper assembly
• Simple instructions for bolt-on installation

Optional Caliper powder coat colors available ( Red, Black)

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

REAR DISC BRAKE CONVERSION KIT , 1971-1996 GM FULL SIZE  PASSENGER CAR AND WAGONs.  FITS 10 & 12 BOLT REAR END WITH EITHER SMALL AXLE FLANGE PATTERN OR LARGE AXLE FLANGE PATTERN

FITS 5 X 5   and  5 x 4.75  WHEEL BOLT PATTERN

This kit contains all the parts you need to convert your 1971-1996 GM- full size passenger car and wagons, 10/12 bolt pattern vehicle from drum to disc brakes.  Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

**Note: will not work with C-clip eliminators

Kit features.

• Single piston cast iron calipers with built in parking brakes
• Calipers come with a zinc plated finish and dust boots
• Kit comes with DOT Flex Hoses, axle shims, new hard lines
• Semi-metallic brake pads
• Stainless steel shim washers to center the caliper assembly
• Two 11.3” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Stainless steel spacers
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with all hardware included
• Optional rotor upgrades available - dimple drilled and slotted with zinc plating
• Optional red or black Caliper powder coat available 

Product Description

Get up to 30% more braking power, by installing an SSBC-USA rear disc brake conversion kit. This direct bolt on kit is ideal for 71-96 GM- full size passenger car and wagon, 10/12 bolt pattern vehicles. It is a huge improvement over stock drums. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are zinc-coated for ultimate corrosion resistance.  Each caliper has a chrome steel piston with a large diameter piston bore.  Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor.  Kit includes DOT Flex hoses and new hard lines.  All brackets are e-coated for long life rust prevention.  11.3 inch diameter vented rotors provide maximum durability.  Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

1964 - 1972 GM A BODY FRONT LOWER ALUMINUM 4 PISTON COMP S DRUM TO DISC BRAKE CONVERSION KIT WITH COMPETITION STREET CALIPERS - W123-25

1964 - 1972 GM A BODY FRONT LOWER ALUMINUM 4 PISTON COMP S DRUM TO DISC BRAKE CONVERSION KIT WITH COMPETITION STREET CALIPERS - W123-25

1964-1972 GM A BODY FRONT LOWER ALUMINUM 4 PISTON COMP S DISC BRAKE UPGRADE KIT WITH COMPETITION STREET CALIPERS

Lighten the front suspension of your car with SSBC-USA Competition series calipers. Lighter and stronger calipers with bigger pads and larger piston get better grip to stop with confidence. Simple bolt on instructions and all the parts you need.  Designed for Street and Strip.

1964-1972 GM A BODY FRONT LOWER ALUMINUM 4 PISTON COMP DISC BRAKE UPGRADE KIT WITH COMPETITION STREET CALIPERS

Lighten the front suspension of your car with SSBC-USA Competition calipers. Lighter and stronger calipers with bigger pads and larger piston get better grip to stop with confidence. Simple bolt on instructions and all the parts you need.  Designed for Street and Strip.