Upgrade Brake Kits

2005-2008 FORD F-350 SUPER DUTY-2WD/4WD REAR CALIPER UPGRADE KIT-DIRECT FIT-3 PISTON TRI POWER ALUMINUM CALIPERS-USA MADE

Direct Fit" caliper are designed to replace bulky cast calipers with Light weight large bore Aluminum calipers. They're designed to fit into stock rims and work on stock brake rotors.

For Dual Rear Wheel Only, 2005 -2007, and all 2008 built before 7/30/07

• Tri-Power 3-Piston Aluminum calipers with Stainless Steel Pistons
• Hi-Performance 3-Piston direct replacement for factory 2-piston calipers
• Includes high performance Low dust brake pads
• Optional dimple drilled, slotted and plated rotors available 
• All necessary hardware and full instructions

*NOTE: Designed to be used with stock size rotors

1994-1997 DODGE RAM 1500 2WD/4WD REAR DRUM/DISC BRAKE CONVERSION KIT-1 (Single) Piston with 11.25" Rotors

Manufactured from quality materials, these rear conversion kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 for assistance.

Kit features:

• Single piston cast iron calipers with built in parking brakes
  
• Calipers come with a Zinc plated finish
• Semi-metallic brake pads
• Stainless steel shim washers to center the caliper assembly
• Two 11.25” diameter heavy duty vented rotors
• Includes e-coated Mounting brackets
• Caliper dust boots
• Stainless steel spacers
• DOT Flex Hoses, and new hard lines
• Hardware with parking brake cable adapters
• Fits on stock rear axles
• Simple instructions for bolt-on installation with All hardware included
• Optional rotor upgrades (dimple drilled, slotted and plated rotors )  available
• Optional Caliper powder coat colors available (Red, Black)

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are zinc-coated for ultimate corrosion resistance. Each caliper has a chrome steel piston with a large diameter piston bore. Included is a built-in internal parking brake sealed off from the elements.

Calipers and adapters allow you to re-use your factory parking brake cable, and stainless steel shim washers align the caliper over the rotor. Kit includes DOT Flex hoses and new hard lines. All brackets are e-coated for long life rust prevention. 11.25 inch diameter vented rotors provide maximum durability. Easy to read instructions make this kit one of the best on the market!

Disc brake kit will work with most 15” rims and spare tire. Please consult the wheel fitment diagram to confirm clearances. For additional information, please contact SSBC-USA customer service.

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance. No modifications required.

1970-1986 JEEP CJ5/CJ7 FRONT DRUM/DISC BRAKE CONVERSION KIT for -DANA 30

Kit features 2 PISTON BILLET ALUMINUM SUPER TWIN TRUCK CALIPERS - MADE IN THE USA 

KIT IS DESIGNED FOR DANA 30 AXLES 

NOTE* 1970 YEAR JEEPS MIGHT HAVE FACTORY MASTER CYLINDER MOUNTED UNDER THE VEHICLE, INCLUDED MANUAL MASTER CYLINDER WILL NOT REPLACE FACTORY MASTER FOR 1970 ONLY

SSBC-USA  Super Twin Truck 2-piston billet aluminum calipers come with Clear Anodize finish. Optional  powder-coating available.

Kit Includes dimple drilled, slotted and plated rotors and  high performance pads

• SUPER TWIN TK 2-Piston billet  aluminum calipers.
• High performance pads
• All installation hardware
• E-coated mounting brackets
• Braided stainless flex lines.
• Dual bowl master cylinder with bench bleed kit
• dimple drilled, slotted and plated calipers 
• Optional powder coated in Red or Black is available for calipers

Will fit either factory drum spindles, or factory disk spindles.

FRONT "DIRECT FIT" CALIPER UPGRADE KIT, 1999-2006 GMC AND CHEVROLET ¾ AND 1 TON TRUCKS

This Made in the USA kit contains all the parts you need to upgrade your 1999-2006 GMC/CHEVROLET ¾ - 1 Ton truck to new light-weight, tri-power Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700   with any questions.

Kit features

• Made in the USA
• All hardware included
• Tri-Power, light-weight 3 piston Aluminum calipers
• Calipers are finished with a clear anodized coat
• HD square cut seals
• Caliper Dust seals ( D.O.T. design)
• Includes banjo bolts and copper washers
• Semi-metallic brake pads
• Bolts to stock spindles
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black)
• **Note: Must be used with stock sized rotors

Product Description

Made in the USA, this kit by SSBC-USA is a Tri-power Aluminum caliper upgrade kit. The direct bolt on design is ideal to upgrade your 1999-2006 GMC/CHEVROLET ¾ - 1 Ton truck  from bulky cast calipers, to lightweight Aluminum calipers. You'll get better performance with a factory look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are coated for ultimate corrosion resistance. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT CALIPER UPGRADE KIT, 2-PISTON ‘SUPER TWIN’ ALUMINUM CALIPER KIT, 1978-1996 CARS   

Direct Replacement for OE Calipers

**Note: Must be used with stock sized rotors

This Made in the USA kit contains all the parts you need to upgrade your GM- F body to new light-weight, sport twin Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

Kit features:

• For both power and non-power vehicles
• All hardware included
• 2 piston light weight, Sport Twin HD aluminum calipers
• Direct bolt-on replacement for O.E. single piston calipers
• Calipers are finished with a clear anodized coating
• Heavy duty, thick walled stainless steel pistons
• These calipers use a duel O-ring system (pressure and dust)
• Includes banjo bolts and copper washers
• Semi-metallic brake pads
• Bolts to stock spindles
• Simple instructions for bolt-on installation

Made in the USA, this kit by SSBC-USA is a Sport Twin Aluminum caliper upgrade kit. The direct bolt on design is ideal to upgrade your GM- F body from bulky cast calipers, to lightweight Aluminum calipers. You'll get better performance and a sleek look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are coated for ultimate corrosion resistance. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required. 

FRONT CALIPER UPGRADE KIT FOR GM METRIC APPLICATIONS

2- Piston ‘Sport Twin’ Aluminum Calipers

**Note: Must be used with stock sized rotors 

This made in the USA kit contains all the parts you need to upgrade your GM metric to new light-weight, sport twin Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• MADE IN THE U.S.A. All hardware included
• 2 piston light weight, Sport Twin HD aluminum calipers
• This is a direct bolt-on replacement for O.E. single piston calipers
• Heavy duty, thick walled stainless steel pistons
• These calipers use a duel o-ring system (pressure and dust)
• Includes banjo bolts and copper washers
• Semi-metallic brake pads
• Bolts to stock front spindles
• Simple instructions for bolt-on installation

Made in the USA, this kit by SSBC-USA is a Sport Twin Aluminum caliper upgrade kit. The direct bolt on design is ideal to upgrade your GM metric, from bulky cast calipers, to lightweight Aluminum calipers. You'll get better performance and a sleek look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are coated for ultimate corrosion resistance.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

FRONT CALIPER UPGRADE KIT FOR GM METRIC APPLICATIONS

2- Piston ‘Sport Twin’ Aluminum Calipers

**Note: Must be used with stock sized rotors 

This made in the USA kit contains all the parts you need to upgrade your GM metric to new light-weight, sport twin Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

KIT FEATURES

• MADE IN THE U.S.A. All hardware included
• 2 piston light weight, Sport Twin HD aluminum calipers
• This is a direct bolt-on replacement for O.E. single piston calipers
• Calipers are finished with a clear anodized coating
• Heavy duty, thick walled stainless steel pistons
• These calipers use a duel O-ring system (pressure and dust)
• Includes banjo bolts and copper washers
• Semi-metallic brake pads
• Bolts to stock front spindles
• Simple instructions for bolt-on installation
• Optional Caliper powder coat colors available (Red, Black) 

Product Description

Made in the USA, this kit by SSBC-USA is a Sport Twin Aluminum caliper upgrade kit. The direct bolt on design is ideal to upgrade your GM metric, from bulky cast calipers, to lightweight Aluminum calipers. You'll get better performance and a sleek look.

The upgraded calipers give modern braking capability in a compact design.  Premium quality calipers are coated for ultimate corrosion resistance.  Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

1988-1999 GM 1500 2WD/4WD and  1994-1999 DODGE 1/2 TON 2/4 WD FRONT CALIPER UPGRADE KIT-SUPER TWIN TK-QUICK CHANGE ALUMINUM CALIPERS-USA MADE

Super Twin Truck 2-Piston aluminum calipers; Hi-Performance 2-piston direct replacement for GM AND DODGE calipers; Caliper Kit Includes:; (2) Super Twin Truck 54 mm calipers; Banjo Bolts and copper washers; Hi-Performance Brake Pads; All Necessary Hardware; 

This made in the USA kit contains all the parts you need to upgrade your 1988-1999 GM 1500 series and DODGE RAM truck calipers to light-weight Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

Kit Includes

• All hardware
• 2 piston light-weight, Super Twin TK Aluminum calipers finished with a clear anodized coat and black powder coat
• Heavy duty, thick walled stainless steel pistons
• Dual O-ring system (pressure and dust)
• Banjo bolts and copper washers
• Semi-metallic brake pads
• Simple instructions for bolt-on installation

**Note: Must be used with stock sized rotors, bolts to stock spindles

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

1988-1999 GM 1500 2WD/4WD AND 1994-1999 DODGE RAM 1/2 TON 2/4 WD FRONT CALIPER UPGRADE KIT-SUPER TWIN TK-QUICK CHANGE ALUMINUM CALIPERS-USA MADE

Super Twin Truck 2-Piston aluminum calipers; Hi-Performance 2-piston direct replacement for GM AND DODGE calipers; Caliper Kit Includes:; (2) Super Twin Truck 54 mm calipers; Banjo Bolts and copper washers; Hi-Performance Brake Pads; All Necessary Hardware; 

This made in the USA kit contains all the parts you need to upgrade your   truck calipers to light-weight Aluminum calipers. Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system. Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at 1-716-775-6700 with any questions.

Kit Includes

• All hardware
• 2 piston light-weight, Super Twin TK Aluminum calipers finished with a clear anodized coat
• Heavy duty, thick walled stainless steel pistons
• Dual O-ring system (pressure and dust)
• Banjo bolts and copper washers
• Semi-metallic brake pads
• Simple instructions for bolt-on installation

**Note: Must be used with stock sized rotors, bolts to stock spindles

The upgraded calipers give modern braking capability in a compact design. Premium quality calipers are coated for ultimate corrosion resistance. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles. Kits come complete and are designed for simple bolt-on installation. SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.

Ford F-450/550 Caliper Upgrade Kit - Rear

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, improved stopping power,  WILL NOT fit behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This rear brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2025 Ford F-450. Designed and engineered to provide more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston rear calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 rear brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build
• Dimple drilled, slotted and plated rotors are available 

Fits These Vehicles: 

• 2017-2025 Ford F-450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Ford F-450/550 Caliper Upgrade Kit - Rear

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, IMPROVED stopping power,  DOES NOT fit behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This rear brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2025 Ford F-450. Designed and engineered to provide more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston rear calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 rear brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build
• Dimple drilled, slotted and plated rotors are available  

Fits These Vehicles: 

• 2017-2025 Ford F-450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Ford F-450/550 Caliper Upgrade Kit - REAR

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, improved  stopping power, eye-popping looks, WILL NOT fit behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This rear brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2025 Ford F-450. Designed and engineered to provide  more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston rear calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 rear brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build
• Dimple drilled, slotted and plated rotors are available 

Fits These Vehicles: 

• 2017-2025 Ford F-450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

The Brawler LT Brake Caliper offers an innovative braking solution that combines outstanding performance and style for your (2007 - 2019) GM 1500 1/2-Ton Trucks. Specifically designed with the everyday driver in mind, these calipers perfect for those who have larger wheels/tires and engage in moderate towing or performance activities. Here are some key features and details about this remarkable product:

•    Proudly Made in the USA: The Brawler LT Brake Caliper is the ONLY Big Brake Caliper manufactured in the United States, ensuring the highest quality and craftsmanship.

•    Machined Billet Aluminum: Crafted from high-quality, aircraft-grade T6061 billet aluminum, these calipers are lightweight yet incredibly strong, offering durability and reliability.

•   Dimpled and Slotted Rotors: Efficient directionally designed “Slots” to reduce brake fade and glazing. “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects and fully vented vane configuration for maximum cooling. All surfaces are Zinc plated to prevent corrosion.

•    6-Piston Design: Each caliper features six heavy-duty stainless-steel pistons, providing maximum stopping power and improved brake performance.

•    High-Friction Brake Pads: The Brawler LT Brake Caliper comes with high-performance ceramic brake pads that offer excellent friction and heat dissipation, resulting in reduced brake fade and increased stopping power.

•    Stainless Steel Construction: The calipers are equipped with stainless steel pistons and full-size bleeders, ensuring resistance to corrosion and longevity.

•    Direct Fit: The Brawler LT Brake Caliper is specifically designed to fit the 2007-2019 GM 1500 2WD and 4WD models, making installation quick and hassle-free.

•    Eye-Catching Design: With its eye-popping looks, the Brawler LT Brake Caliper adds a touch of style to your truck, enhancing its overall appearance.

•    Easy Installation: The Brawler LT Brake Caliper comes fully assembled and includes all the necessary hardware and detailed installation instructions, making it easy for you to upgrade your brake calipers.

•    OE Rotor & Brake Pad Compatibility: The Brawler LT Brake Caliper is a direct replacement for the OE rotors and pads, making it a seamless upgrade without the need for additional modifications.

•    Clear Anodized or Powder Coat Finish: You can choose between a clear anodized or powder coat finish in red or black. Custom colors and finishes are available upon request, please speak with one of our customer support representatives about using a custom color. 

**Designed for external parking brake.

Upgrade your GM 1500 1/2-Ton Trucks braking system with the Brawler LT Brake Calipers and experience the combination of incredible stopping power, stunning aesthetics, and reliable performance. Contact us for more information or to discuss custom powder coating options to perfectly match your vehicle or build.

The Brawler LT Front Brake Kit Fits These Vehicles:

•    2007 Chevy 1500/GMC1500
•    2008 Chevy 1500/GMC1500
•    2009 Chevy 1500/GMC1500
•    2010 Chevy 1500/GMC1500
•    2011 Chevy 1500/GMC1500
•    2012 Chevy 1500/GMC1500
•    2013 Chevy 1500/GMC1500
•    2014 Chevy 1500/GMC1500
•    2015 Chevy 1500/GMC1500

•    2016 Chevy 1500/GMC1500
•    2017 Chevy 1500/GMC1500
•    2018 Chevy 1500/GMC1500
•    2019 Chevy 1500/GMC1500

Consult fitment diagram for your specific application.

* Orders ship in 1-2 weeks.

The Brawler LT Brake Caliper offers an innovative braking solution that combines outstanding performance and style for your (2007 - 2019) GM 1500 1/2-Ton Trucks. Specifically designed with the everyday driver in mind, these calipers perfect for those who have larger wheels/tires and engage in moderate towing or performance activities. Here are some key features and details about this remarkable product:

•    Proudly Made in the USA: The Brawler LT Brake Caliper is the ONLY Big Brake Caliper manufactured in the United States, ensuring the highest quality and craftsmanship.

•    Machined Billet Aluminum: Crafted from high-quality, aircraft-grade T6061 billet aluminum, these calipers are lightweight yet incredibly strong, offering durability and reliability.

•   Dimpled and Slotted Rotors: Efficient directionally designed “Slots” to reduce brake fade and glazing. “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects and fully vented vane configuration for maximum cooling. All surfaces are Zinc plated to prevent corrosion.

•    6-Piston Design: Each caliper features six heavy-duty stainless-steel pistons, providing maximum stopping power and improved brake performance.

•    High-Friction Brake Pads: The Brawler LT Brake Caliper comes with high-performance ceramic brake pads that offer excellent friction and heat dissipation, resulting in reduced brake fade and increased stopping power.

•    Stainless Steel Construction: The calipers are equipped with stainless steel pistons and full-size bleeders, ensuring resistance to corrosion and longevity.

•    Direct Fit: The Brawler LT Brake Caliper is specifically designed to fit the 2007-2019 GM 1500 2WD and 4WD models, making installation quick and hassle-free.

•    Eye-Catching Design: With its eye-popping looks, the Brawler LT Brake Caliper adds a touch of style to your truck, enhancing its overall appearance.

•    Easy Installation: The Brawler LT Brake Caliper comes fully assembled and includes all the necessary hardware and detailed installation instructions, making it easy for you to upgrade your brake calipers.

•    OE Rotor & Brake Pad Compatibility: The Brawler LT Brake Caliper is a direct replacement for the OE rotors and pads, making it a seamless upgrade without the need for additional modifications.

•    Clear Anodized or Powder Coat Finish: You can choose between a clear anodized or powder coat finish in red or black. Custom colors and finishes are available upon request, please speak with one of our customer support representatives about using a custom color. 

**Designed for external parking brake.

Upgrade your GM 1500 1/2-Ton Trucks braking system with the Brawler LT Brake Calipers and experience the combination of incredible stopping power, stunning aesthetics, and reliable performance. Contact us for more information or to discuss custom powder coating options to perfectly match your vehicle or build.

The Brawler LT Front Brake Kit Fits These Vehicles:

•    2007 Chevy 1500/GMC1500
•    2008 Chevy 1500/GMC1500
•    2009 Chevy 1500/GMC1500
•    2010 Chevy 1500/GMC1500
•    2011 Chevy 1500/GMC1500
•    2012 Chevy 1500/GMC1500
•    2013 Chevy 1500/GMC1500
•    2014 Chevy 1500/GMC1500
•    2015 Chevy 1500/GMC1500

•    2016 Chevy 1500/GMC1500
•    2017 Chevy 1500/GMC1500
•    2018 Chevy 1500/GMC1500
•    2019 Chevy 1500/GMC1500

Consult fitment diagram for your specific application.

* Orders ship in 1-2 weeks.

Front USA made, Direct Fit 6-Piston Aluminum Caliper Upgrade Kit, Black with DS Rotors 

2005-20012 Ford F250, F350, Excursion

This kit contains all the parts you need to replace your 2005-2008 Ford F250/F350/Excursion calipers, with large bore billet Aluminum calipers.  Manufactured from quality materials, these caliper upgrade kits are designed to bolt directly onto your stock axle and provide you with the performance and durability you expect from a modern brake system.

Kit Features:

• 6 piston large bore, light-weight  Aluminum calipers
• Calipers come with a clear anodized finish 
• Heavy duty, thick walled stainless steel pistons
• HD square cut seals
• Caliper Dust seals ( D.O.T. design)
• Semi-metallic brake pads
• Stainless anti-rattle clips
• Fits on stock rotors
• Bolts to stock spindles
• Simple instructions for bolt-on installation with All hardware included
• Comes in Clear Anodized, Red powder coat and Black powder coat

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent corrosion

Product Description

This kit by SSBC-USA is a V6  6-piston Aluminum caliper upgrade kit. The direct bolt on design is ideal to upgrade your 2005-2008 Ford F250, F350, or Excursion from bulky cast calipers, to light weight, large bore Aluminum calipers. You'll get dependable performance with a factory look.

The upgraded caliper kit gives modern braking capability in a compact design.  Premium quality calipers are coated for ultimate corrosion resistance. Easy to read instructions make this kit one of the best on the market!

SSBC-USA designs and manufactures high-quality brake components and systems for a wide range of vehicles.  Kits come complete and are designed for simple bolt-on installation.  SSBC-USA truck aftermarket products provide improved stopping power and fit into stock rims while maintaining the original look and appearance.  No modifications required.

Please consult the wheel fitment diagram to confirm clearances and contact our customer service/technical support at (716) 775-6700 with any questions.

Ford F-450/550 Caliper Upgrade Kit - FRONT

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, improved  stopping power, eye-popping looks, fits behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2024 Ford F-450. Designed and engineered to provide  more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build
• Dimple drilled, slotted and plated rotors are available 

Fits These Vehicles: 

• 2017 Ford F-450
• 2018 Ford F-450
• 2019 Ford F-450
• 2020 Ford F-450
• 2021 Ford F-450
• 2022 Ford F-450
• 2023 Ford F-450
• 2024 Ford F-450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Ford F-450/550 Caliper Upgrade Kit - FRONT

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, improved stopping power,  fits behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2024 Ford F-450. Designed and engineered to provide more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build
• Dimple drilled, slotted and plated rotors are available 

Fits These Vehicles: 

• 2017 Ford F-450
• 2018 Ford F-450
• 2019 Ford F-450
• 2020 Ford F-450
• 2021 Ford F-450
• 2022 Ford F-450
• 2023 Ford F-450
• 2024 Ford f450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, stopping power, eye-popping looks, fits behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2024 Ford F-450. Designed and engineered to provide more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2017 Ford F-450
• 2018 Ford F-450
• 2019 Ford F-450
• 2020 Ford F-450
• 2021 Ford F-450
• 2022 Ford F-450
• 2023 Ford F-450
• 2024 Ford F450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.

Highlights:  Made In The USA, direct fit, 8-piston machined billet aluminum calipers, DDS Rotors, stainless steel pistons, stopping power,  fits behind factory 19.5" wheels, uses stock rotors, 2017-2025 Ford F-450. Custom colors and finishes available to match your truck/build.

You need the biggest brake that’s built as tough as your Ford F-450. The 8-piston, heavy-duty B8-Beast Brake Caliper Upgrade Kit from SSBC-USA gives your Ford Super Duty F-450 truck the stopping power and performance it needs to get any job done. 

This front brake caliper kit is Made In The USA from high-quality aircraft-grade T6061 aluminum billet and is designed to bolt onto your 4WD 2017-2024 Ford F-450. Designed and engineered to provide more stopping power, the B8-Beast overpowers the empty space behind your wheels improving the overall look and style of either your everyday ride or prized, custom build. 

The 8-piston aluminum calipers are a direct replacement for factory 2-piston front calipers. The SSBC-USA kit includes high-performance severe-duty brake pads, all necessary hardware and full instructions. Standard colors are clear anodized, red, and black, with optional custom powder coat colors available. 

This Made In The USA kit contains all the parts you need to replace your Ford Super Duty F-450 front brake system with light-weight, large bore, aircraft-grade T6061 aluminum billet American-made calipers. CNC-manufactured from quality materials, our caliper upgrade kit bolts directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. 

Kit Benefits: 

• Made in the USA
• Significantly upgraded safety
• Direct-fit (No brackets required)
• Bolts onto stock spindles with existing mounting hardware
• Works with factory hydraulics and ABS
• Faster braking response times
• Uses stock rotors
• Fits behind most factory wheels (Consult fitment diagram)
• Fully assembled and easy to install
• Simple Instructions for bolt-on Installation 

Kit Features: 

• 2 Calipers complete with high-friction, low-dust semi-metallic brake pads
• 8 heavy duty, large bore stainless steel pistons per caliper
• 7 bridge bolts per caliper for maximum stiffness
• 2 stainless steel pad pins per caliper
• 2 stainless steel anti-rattle pad clips per caliper
• 4 stainless steel bleeders per caliper
• 8 HD square-cut pressure seals & 8 dust seals per caliper (DOT design)
• 2 internal crossover O-rings per caliper for responsive flow
• 1 banjo bolt with compression washer per caliper
• Standard colors – Clear anodized, red, black

Rotor Features:

• Efficient directionally designed “Slots” to reduce brake fade and reduce glazing
• “Dimple Drilled” to give the look of the traditional “Cross Drilled” design but without the life shortening effects
• Fully vented vane configuration for maximum cooling
• Direct replacement of OE Rotors
• All surfaces are Zinc plated to prevent

Options – Contact us for details: 

• Custom powder coating to match your vehicle/build

Fits These Vehicles: 

• 2017 Ford F-450
• 2018 Ford F-450
• 2019 Ford F-450
• 2020 Ford F-450
• 2021 Ford F-450
• 2022 Ford F-450

Consult fitment diagram for your specific application.

Please contact Technical Support at 716-775-6700 with any questions or to discuss special applications.